Lanthanum-Zirconate and Lanthanum-Aluminate Based High-κ Dielectric Stacks on Silicon Substrates
Authors:
- S. AbermannSAS. Abermann
- C. HenkelCHC. Henkel
- O. BethgeOBO. Bethge
- C. J. StraifCSC. J. Straif
- H. HutterHHH. Hutter
- E. BertagnolliEBE. Bertagnolli
- 1 January 2009
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 156 (5) , G53-B627
Abstract
The oxygen reduction kinetics was investigated at the porous (LSM)–yttria-stabilized zirconia (YSZ) composite electrodes with various YSZ grain sizes by employing ac impedance spectroscopy and the potentiostatic current transient (PCT) technique. For this purpose, LSM-YSZ composite electrodes were coated on a YSZ pellet by sintering at in air. The grain size of YSZ was controlled by varying the initial particle size of YSZ. From analyses of the ac impedance spectra and the cathodic PCTs measured on the electrodes as functions of temperature and ionic conductivity, it was first recognized that the overall cathodic reaction is mainly controlled by the oxygen-exchange reaction coupled with ion migration at low operating temperatures below . Second, from the discrete Fourier transformation analysis of impedance spectra, it was confirmed that the distribution of relaxation times for oxygen-ion migration becomes wider with increasing YSZ grain size in the range from due to the larger effective migration length . Finally, from the theoretical and experimental analyses of the cathodic PCTs based upon the equivalent circuit in consideration of the relaxation time distribution for ion migration, it is suggested that as the YSZ grain size decreases, the higher density of the three-phase-boundary (TPB) length leads to an increase in the overall current density and a reduction in the time to reach the steady-state current density , thus causing high power density.Keywords
This publication has 16 references indexed in Scilit:
- Effects of Al content on the electrical properties of LaxAlyOz films grown on TiN substrate by atomic layer depositionApplied Physics Letters, 2007
- Evaluation of lanthanum based gate dielectrics deposited by atomic layer depositionJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2005
- High dielectric constant oxidesThe European Physical Journal Applied Physics, 2004
- High-$kappa$/Metal–Gate Stack and Its MOSFET CharacteristicsIEEE Electron Device Letters, 2004
- High-κ gate dielectrics: Current status and materials properties considerationsJournal of Applied Physics, 2001
- Formation and stability of lanthanum oxide thin films deposited from β-diketonate precursorApplied Surface Science, 2001
- Properties of (Nb1 − xTax)2O5 solid solutions and (Nb1 − xTax)2O5-ZrO2 nanolaminates grown by Atomic Layer EpitaxyNanostructured Materials, 1997
- Titanium oxide/aluminum oxide multilayer reflectors for “water-window” wavelengthsApplied Physics Letters, 1997
- Tailoring the dielectric properties of HfO2–Ta2O5 nanolaminatesApplied Physics Letters, 1996
- Atomic layer epitaxyMaterials Science Reports, 1989