Optimal placement of piezoelectric patches on the rotor shaft for vibration control using Modal Strain Energy method
- 15 April 2026
- journal article
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (9)
Abstract
This paper presents a comprehensive methodology for the optimal placement of piezoelectric patches on the shaft surface of a rotor bearing system to apply active vibration control. The placement strategy based on the Modal Strain Energy (MSE) method is used to identify the locations along the shaft where the modal deformation energy is maximum at the operating rotor speeds. This approach is particularly effective for multimodal control, as the MSE distribution can be evaluated for different mode shapes to ensure the actuators have significant authority over multiple critical resonances. To fully exploit this optimal placement, a Linear Quadratic Regulator (LQR) is employed to compute feedback gains that minimize a quadratic cost function balancing displacement reduction and control effort. The finite element method is applied to model a rotor bearing system composed of a flexible shaft and rigid disks. The rotor is actively controlled using piezoelectric patches bonded on selected locations on the shaft. An LQR controller is used to provide feedback signals for multiple piezoelectric patch pairs. The optimal weighting matrices of the controller are selected using the Genetic Algorithm (GA) to improve the effectiveness of the system. The control signals are transmitted to the patches via multipath slip rings. Simulation results for the steady state vibration response for a selected range of excitation frequencies show that significant vibration reductions of up to 86% and 90% are achieved, respectively, at the first and second critical speeds for the considered case study. The case study shows that the integrated optimization approach based on the MSE method proves to be effective and computationally efficient.Keywords
This publication has 17 references indexed in Scilit:
- Multimodal optimization of piezoelectric patches number and placement for effective structural vibration reductionActa Mechanica, 2025
- Optimal placement of piezoelectric actuator/sensor pairs for active vibration control of beams with different boundary conditionsMechanics Based Design of Structures and Machines, 2024
- Energy-Based Optimal Placement of Piezoelectric Actuator on Smart Thin PlateJournal of Vibration Engineering & Technologies, 2023
- Optimal configuration of piezoelectric sensors and actuators for active vibration control of a plate using a genetic algorithmActa Mechanica, 2015
- Placement and dimension optimization of shunted piezoelectric patches for vibration reductionJournal of Sound and Vibration, 2012
- Optimal piezoelectric actuator and sensor location for active vibration control, using genetic algorithmJournal of Sound and Vibration, 2010
- Dynamics of Rotating Machines2010
- The damping of a truss structure with a piezoelectric transducerComputers & Structures, 2008
- Comments On "Active Modal Control Of Vortex-induced Vibrations Of A Flexible Cylinder"Journal of Sound and Vibration, 1994
- Active Modal Control of Vortex-Induced Vibrations of a Flexible CylinderJournal of Sound and Vibration, 1993