Resist profile characteristics caused by photoelectron and Auger electron blur at the resist–tungsten substrate interface in 100 nm proximity x-ray lithography
Authors:
Open Access
- 1 November 2000
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 18 (6) , 3349-3353
Abstract
The replicated resist pattern characteristics caused by photoelectrons and Auger electrons generated from the W substrate were investigated for 100 nm proximity x-ray lithography. In addition, simulations for a hard x-ray spectrum having 2.36 keV average energy were performed to investigate the substrate electron effects in hard x-ray lithography. In the experiments, it was found that the secondary electrons from the W substrate caused undercut and footing of resist profiles at the resist–substrate interface. Several buffer layers with varying thicknesses were tested to reduce the photoelectron effects from the W substrate. The best thickness of the buffer layers for a good resist pattern profile was discovered to be >30 nm. Furthermore, the experimental results were quantitatively compared to the results from computer simulations using the Monte Carlo method. For hard x rays, we predict that the exposure latitude is worse on both W and Si substrates.Keywords
This publication has 20 references indexed in Scilit:
- Extension of x-ray lithography to 50 nm with a harder spectrumJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1999
- Direct measurement of the effect of substrate photoelectrons in x-ray nanolithographyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Influence of Optical Parameters of Synchrotron Radiation Lithography Beamline on Pattern ReplicationJapanese Journal of Applied Physics, 1996
- Replicating characteristics by SR lithography1995
- Parametric modeling at resist–substrate interfacesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1994
- Photoelectron effects in x-ray mask replicationJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1991
- Effects of photoelectrons ejected from the substrate on patterning characteristics in x-ray lithographyJournal of Vacuum Science & Technology B, 1987
- Monte Carlo modeling of the photo and Auger electron production in X-ray lithography with synchrotron radiationIEEE Transactions on Electron Devices, 1985
- Influence of photoelectrons on the exposure of resists by x raysJournal of Vacuum Science and Technology, 1978
- Spurious effects caused by the continuous radiation and ejected electrons in x-ray lithographyJournal of Vacuum Science and Technology, 1975