Effect of heat treatment and defects on the tensile behavior of a hot work tool steel manufactured by laser powder bed fusion
Open Access
- 23 April 2023
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 46 (7) , 2681-2696
Abstract
Microstructure and tensile properties of a hot work tool steel manufactured via laser powder bed fusion (LPBF) were investigated. Specimens were built under two different orientations and subjected to two quenching and tempering heat treatments, featuring different austenitizing and tempering temperatures and the eventual presence of a sub‐zero step. Microstructural analyses revealed a homogeneous tempered martensite structure after both heat treatments, with the only distinction of a higher alloying segregation at a sub micrometric scale length in samples subjected to the highest tempering temperatures. Hardness and tensile tests indicated a negligible effect of building orientation on mechanical properties, but a significant influence of heat treatment parameters. The treatment featuring the lower tempering temperatures and the sub‐zero step resulted in higher hardness, tensile strength, and elongation, attributed to a lower martensite tempering and alloying segregation. Tensile fracture occurred via crack initiation and unstable propagation from large LPBF defects in all the investigated conditions.Keywords
This publication has 57 references indexed in Scilit:
- Viewpoint: metallurgical aspects of powder bed metal additive manufacturingJournal of Materials Science, 2015
- The effects of annealing temperature and cooling rate on carbide precipitation behavior in H13 hot-work tool steelJournal of Alloys and Compounds, 2015
- Metal Additive Manufacturing: A ReviewJournal of Materials Engineering and Performance, 2014
- Extension of the Martensite Transformation Temperature Relation to Larger Alloying Elements and ContentsAdvanced Engineering Materials, 2013
- Low-temperature martensitic transformation in tool steels in relation to their deep cryogenic treatmentActa Materialia, 2013
- Influence of shallow and deep cryogenic treatment on the residual state of stress of 4140 steelJournal of Materials Processing Technology, 2011
- Influence of sub-zero treatments on fracture toughness of AISI D2 steelMaterials Science and Engineering: A, 2010
- Sub-zero treatments of AISI D2 steel: Part I. Microstructure and hardnessMaterials Science and Engineering: A, 2010
- Correlation of microstructure with wear behaviour of deep cryogenically treated AISI D2 steelWear, 2009
- Deep Cryogenic Treatment: A Bibliographic ReviewThe Open Mechanical Engineering Journal, 2008