Adhesion force measurement between the stamp and the resin in ultraviolet nanoimprint lithography—an investigative approach
Authors:
- Tae Ho YoonTYTae Ho Yoon
- Hwan Soo JangHJHwan Soo Jang
- Jae Jong LeeJLJae Jong Lee
- Dong Pyo KimDKDong Pyo Kim
- 12 January 2009
- journal article
- Published by IOP Publishing in Nanotechnology
- Vol. 20 (5) , 055704
Abstract
In the ultraviolet nanoimprint lithography (UV-NIL) process, the surface interaction between the mold and the resist is essential along with molecularly clean separation of the mold from the surface of the cured resist for repeated use of the mold. In our present study, various mold-resin combinations have been examined by a tensile strength method to determine the adhesion force between a mold with a relief pattern and a photocurable resin. The adhesion force of polymer molds of the fluorine-containing polymers perfluoropolyether dimethacrylate (PFPE) and polydimethylsiloxane (PDMS) were compared to those of hard molds such as Si and quartz against several commercial UV-NIL resins. Eventually, PFPE with higher molecular weight-AMONIL-was found to be an excellent UV-NIL mold-resin combination with the lowest adhesion force per unit area (20 kPa). In particular, the 36-fold repeated imprinting with a high molecular weight PFPE mold showed only a slight increase of adhesion force by 36 kPa with molecularly clean release from the AMONIL resin, whereas a surface-modified PDMS mold revealed highly increased adhesion from an initial 20 kPa to 120 kPa after repeated use.Keywords
This publication has 20 references indexed in Scilit:
- AFM characterization of anti-sticking layers used in nanoimprintMicroelectronic Engineering, 2006
- Vapor-Phase Self-Assembled Monolayer for Improved Mold Release in Nanoimprint LithographyLangmuir, 2005
- High‐Resolution Soft Lithography: Enabling Materials for NanotechnologiesAngewandte Chemie International Edition, 2004
- Reproducibility and homogeneity in step and repeat UV-nanoimprint lithographyMicroelectronic Engineering, 2004
- Solvent-Resistant Photocurable “Liquid Teflon” for Microfluidic Device FabricationJournal of the American Chemical Society, 2004
- Measurement of Adhesive Force Between Mold and Photocurable Resin in Imprint TechnologyJapanese Journal of Applied Physics, 2002
- Step and flash imprint lithography: Template surface treatment and defect analysisJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2000
- Conformal contact and pattern stability of stamps used for soft lithographyJournal of Applied Physics, 2000
- Imprint Lithography with 25-Nanometer ResolutionScience, 1996
- Local elasticity measurement on polymers using atomic force microscopyThin Solid Films, 1996