Novel preparation and mechanical properties of rigid polyurethane foam/organoclay nanocomposites
- 25 June 2007
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 106 (1) , 439-447
Abstract
A novel method for preparing rigid polyurethane (PU) foam/organoclay nanocomposites was developed through the direct incorporation of an organoclay into PU foam matrices without the addition of any physical or chemical blowing agent. The resultant foams with an appropriate content of the organoclay had a finer cell structure than the pristine PU foams because the organoclay not only acted as a nucleating agent as expected but also acted as a blowing agent of the PU foams; this could be attributed to the bound water between the interlayers of the organoclay. In addition, the incorporation of the organoclay up to 4 phr resulted in improvements in the tensile and compressive strengths, with the maximum values appearing at 2 phr (110 and 152%, respectively). The significant improvement in the mechanical properties could be attributed to the finer cell structure and the increased internal strength of the materials due to the higher degree of hydrogen bonding. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007Keywords
This publication has 25 references indexed in Scilit:
- Properties of bulk-polymerized thermoplastic polyurethane nanocompositesPolymer, 2005
- Influence of clay modification process in PA6-layered silicate nanocomposite propertiesPolymer, 2005
- Polyurethane/clay nanocomposites foams: processing, structure and propertiesPolymer, 2005
- Thermal Transitions and Barrier Properties of Olefinic NanocompositesChemistry of Materials, 2004
- Synthesis of chain-extended organifier and properties of polyurethane/clay nanocompositesPolymer, 2004
- Polymer Films Possessing Nanoreinforcements via Organically Modified Layered SilicateChemistry of Materials, 2004
- Nanocomposites of polyurethane with various organoclays: Thermomechanical properties, morphology, and gas permeability*Journal of Polymer Science Part B: Polymer Physics, 2002
- Properties of rigid polyurethane foams blown by HCFC 141B and distilled waterJournal of Applied Polymer Science, 2001
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000
- Synthesis of nylon 6-clay hybridJournal of Materials Research, 1993