Noise Reduction Mechanisms of an Airfoil with Trailing Edge Serrations at Low Mach Number
Open Access
- 10 September 2019
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 9 (18) , 3784
Abstract
Trailing-edge serrations have proven to be valid applications of trailing edge noise mitigation for an airfoil, while the physical noise reduction mechanism has not been adequately studied. We performed simulations employing Large-eddy simulation and the Lighthill–Curle method to reveal the variation in the hydrodynamic field and sound source due to the trailing edge serrations. The grid resolution and computational results were validated against experimental data. The simulation results show that: the trailing edge serrations impede the growth of spanwise vortices and promote the development of streamwise vortices near the trailing edge and the wake; the velocity fluctuations in the vertical cross-section of the streamwise direction near the trailing edge are reduced for the serrated airfoil, thereby obviously reducing the strength of the pressure fluctuations near the trailing edge; and the trailing edge serrations decrease the distribution of the sound source near the trailing edge and reduce the local peak value of sound pressure level in a specific frequency range as well as the overall sound pressure level. Moreover, we observed that, in the flow around the NACA0012 airfoil, the location where the strong sound source distribution begins to appear is in good agreement with the location where the separated boundary layer reattaches. It is therefore effective to reduce trailing edge noise by applying serrations on the upstream of the reattachment point.Keywords
Funding Information
- the project of Chinese National Natural Science Foundation (51575220)
- the Key Scientific and Technological Project of Jilin Province (20160519008JH and 20170204073GX)
This publication has 40 references indexed in Scilit:
- Bio-Inspired Aerodynamic Noise Control: A Bibliographic ReviewApplied Sciences, 2019
- Noise reduction mechanisms of sawtooth and combed-sawtooth trailing-edge serrationsJournal of Fluid Mechanics, 2018
- Improvement of airfoil trailing edge bluntness noise modelAdvances in Mechanical Engineering, 2016
- On the aeroacoustic and flow structures developed on a flat plate with a serrated sawtooth trailing edgeJournal of Sound and Vibration, 2015
- Noise-Reduction Mechanism of a Flat-Plate Serrated Trailing EdgeAIAA Journal, 2013
- Acoustic and hydrodynamic analysis of the flow around an aerofoil with trailing-edge serrationsJournal of Fluid Mechanics, 2012
- Assessment of Technologies for the Silent Aircraft InitiativeJournal of Propulsion and Power, 2009
- Reduction of Wind Turbine Noise Using Optimized Airfoils and Trailing-Edge SerrationsAIAA Journal, 2009
- Experimental Investigations in Low-Noise Trailing Edge Design.AIAA Journal, 2005
- Aerodynamic sound generation by turbulent flow in the vicinity of a scattering half planeJournal of Fluid Mechanics, 1970