Direct fabrication of polymer nanofiber membrane for piezoelectric vibration sensor
Authors:
- 1 October 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19300395,p. 1367-1370
Abstract
A modified electrospinning method was introduced to fabricate high-performance piezoelectric membranes directly, where a copper sheet was fixed at the end of the needle and a rotating collector was used. This electrospinnig process provides a uniform parallel electric field with a combined action of strong electric field strength and high stretch ratio to orient poly (vinylidene fluoride) (PVDF) molecular chain, and promote polymorphic change from α-phase to β-phase, which enhances its piezoelectric performance. PVDF samples in different forms were prepared and evaluated by testing their respective piezoelectric performance. The results show that maximal piezoelectric response of the untreated PVDF nanofiber membrane (259 mV) is much better than that of electric poling spin coating film (123 mV) at an excitation voltage of 1.2 V and frequency of 15 Hz. The piezoelectric performance of the untreated membrane shows linearity with excitation voltage and can be further enhanced by electric poling.Keywords
This publication has 13 references indexed in Scilit:
- Electrospun materials for energy harvesting, conversion, and storage: A reviewPure and Applied Chemistry, 2010
- A direct-write piezoelectric PVDF nanogenerator2009
- Pressure sensor from a PVDF filmSensors and Actuators A: Physical, 2008
- Fabrication and testing of a poly(vinylidene fluoride) (PVDF) microvalve for gas flow controlSmart Materials and Structures, 2007
- Conformational changes and phase transformation mechanisms in PVDF solution‐cast filmsJournal of Polymer Science Part B: Polymer Physics, 2004
- Effect of annealing on the structure and properties of poly(vinylidene fluoride) β‐form filmsJournal of Polymer Science Part B: Polymer Physics, 2003
- Effect of crystalline phase, orientation and temperature on the dielectric properties of poly (vinylidene fluoride) (PVDF)Journal of Materials Science, 1999
- Electrospinning process and applications of electrospun fibersJournal of Electrostatics, 1995
- PVdF: An electronically-active polymer for industryMaterials & Design (1980-2015), 1983
- Molecular Vibrations of Three Crystal Forms of Poly(vinylidene fluoride)Macromolecules, 1975