Studies on remelting of tungsten carbide and rare earth modified nickel base alloy composite coating
Authors:
- 1 February 2012
- journal article
- Published by SAGE Publications in Surface Engineering
- Vol. 28 (1) , 73-80
Abstract
The Ni base alloy (EWAC 1004EN) was used to develop coatings on the mild steel substrate by flame spraying process. The Ni base alloy powder was modified by adding tungsten carbide (10 and 20 wt-%) and CeO2 to study their effects on the microstructure, microhardness and abrasive wear behaviour of unmodified and modified coatings. All the coatings were subjected to remelting using tungsten inert gas arc welding. The abrasive wear behaviour of all the coatings in different conditions was studied using different normal loads (5, 10, 15 and 20 N) against 120 and 600 grit size abrasive medium. Scanning electron microscopy analysis of the worn out surfaces was carried out to understand the wear mechanisms. It was observed that the remelting of the coatings increased the hardness of WC and CeO2 modified flame sprayed coatings by ∼35%, while the abrasive wear resistance increased by 1·5- to threefold.Keywords
This publication has 24 references indexed in Scilit:
- Effect of La2O3 addition on the microstructure, hardness and abrasive wear behavior of flame sprayed Ni based coatingsWear, 2009
- Effect of CeO2 addition on the microstructure, hardness, and abrasive wear behaviour of flame-sprayed Ni-based coatingsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2008
- Wear behaviour of thermal flame sprayed FeCr coatings on plain carbon steel substrateJournal of Materials Processing Technology, 2007
- Effects of CeO2 on friction and wear characteristics of Fe–Ni–Cr alloy coatingsTribology International, 2006
- Microstructural and mechanical properties of nickel-base plasma sprayed coatings on steel and cast iron substratesSurface and Coatings Technology, 2005
- An experimental study of the wear performance of NiCrBSi thermal spray coatingsWear, 2003
- Tribological study of NiCrBSi coating obtained by different processesTribology International, 2003
- Sliding wear behaviour of plasma sprayed WC-NiCrBSi coatings at different temperaturesWear, 2001
- An investigation of the abrasive and erosive wear of flame-sprayed coatingsJournal of Materials Processing Technology, 2000
- A study on abrasive resistance of Ni-based coatings with a WC hard phaseWear, 1996