Analysis, Design, and Experimentation of an Isolated ZVT Boost Converter With Coupled Inductors
Authors:
- 12 August 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 26 (2) , 541-550
Abstract
A novel isolated zero-voltage-transition (ZVT) boost converter with coupled inductors is proposed in this paper to satisfy the high power, high step-up, and isolated requirements. In the proposed converter, the input-parallel configuration is adopted to share the large input current and to reduce the conduction losses, while the output-series structure is employed to double the output voltage gain. Consequently, a transformer with a low turns ratio can be applied, which makes the transformer design and optimize easily. Moreover, the active clamp circuits are employed to reduce the switch voltage stress and to recycle the energy stored in the leakage inductance. The ZVT is achieved during the whole switching transition for all the active switches, so the switching losses can be reduced greatly. Furthermore, the diode reverse-recovery problem is partly solved due to the leakage inductance. In addition, the magnetic integration technology is applied to improve the efficiency and to reduce the magnetic component size. Finally, a 48-V input 380-V output 1-kW prototype operating with 100-kHz switching frequency is built and tested to demonstrate the effectiveness of the proposed converter.Keywords
This publication has 17 references indexed in Scilit:
- Zero-Voltage Transition Current-Fed Full-Bridge PWM ConverterIEEE Transactions on Power Electronics, 2009
- High Step-Up Active-Clamp Converter With Input-Current Doubler and Output-Voltage Doubler for Fuel Cell Power SystemsIEEE Transactions on Power Electronics, 2008
- A Family of Isolated Interleaved Boost and Buck Converters With Winding-Cross-Coupled InductorsIEEE Transactions on Power Electronics, 2008
- Study and Implementation of a Current-Fed Full-Bridge Boost DC–DC Converter With Zero-Current Switching for High-Voltage ApplicationsIEEE Transactions on Industry Applications, 2008
- Design and Analysis of Isolated ZVT Boost Converters for High-Efficiency and High-Step-Up ApplicationsIEEE Transactions on Power Electronics, 2007
- Fuel Cell Generation System With a New Active Clamping Current-Fed Half-Bridge ConverterIEEE Transactions on Energy Conversion, 2007
- A New Active Clamping Zero-Voltage Switching PWM Current-Fed Half-Bridge ConverterIEEE Transactions on Power Electronics, 2005
- High-Efficiency Power Conversion for Low Power Fuel Cell Generation SystemIEEE Transactions on Power Electronics, 2005
- An Integrated Magnetic Isolated Two-Inductor Boost Converter: Analysis, Design and ExperimentationIEEE Transactions on Power Electronics, 2005
- Utilization of an active-clamp circuit to achieve soft switching in flyback convertersIEEE Transactions on Power Electronics, 1996