Occupational exposure to welding fume in Australian workplaces
Authors:
Open Access
- 1 January 2026
- journal article
- Published by National Institute of Industrial Health in Industrial Health
- Vol. 64 (2) , 137-148
Abstract
This study aimed to provide information on exposure to welding fume in workplaces in Australia, and the use of control measures in these workplaces. Personal and static samples of welding fume particulates and gases were collected at 20 workplaces whilst welding was being undertaken. Study personnel also recorded observations of the workplace. Total welding fume particulate concentration in the breathing zone was above 1 mg/m3 (the newly established workplace exposure standard). Peak concentrations of ozone were above the peak limitation standard of 0.1 ppm for most workers when they had their head over the welding area. Very few workplaces had active ventilation in place and functioning at the time of the worksite visits, most workplaces relying on natural ventilation coming from the large workspaces, high ceilings and open doors. The use of respiratory protective equipment was sub-optimal; about a quarter of participants used no respiratory protection while welding. This study provides the first comprehensive information on concentration of welding fume particulate and gases in Australian workplaces and the use of relevant control measures. The findings suggest there is considerable scope for improvement in the control of exposure to welding fume.Keywords
Funding Information
- BOC Limited
This publication has 58 references indexed in Scilit:
- Comparing Exposure Levels by Type of Welding Operation and Evaluating the Effectiveness of Fume Extraction GunsApplied Occupational and Environmental Hygiene, 2001
- The Use of a Task-Based Exposure Assessment Model (T-BEAM) for Assessment of Metal Fume Exposures During Welding and Thermal CuttingApplied Occupational and Environmental Hygiene, 2000
- Welding Helmet Airborne Fume Concentrations Compared to Personal Breathing Zone SamplingAIHA Journal, 1995
- Relation between various chromium compounds and some other elements in fumes from manual metal arc stainless steel welding.Occupational and Environmental Medicine, 1993
- Urinary and blood manganese in occupationally nonexposed populations and in manual metal are welders of mild steelInternational Archives of Occupational and Environmental Health, 1992
- Exposure to fumes in typical New Zealand welding operations.1991
- Chromium in Biological Samples from Low-Level Exposed Stainless Steel and Mild Steel WeldersArchives of Environmental Health: An International Journal, 1991
- Occupational exposures in insecticide application, and some pesticides. IARC Working Group on the Evaluation of Carcinogenic Risks to Humans. Lyon, 16-23 October 1990.1991
- Semen quality and sex hormones among mild steel and stainless steel welders: a cross sectional study.Occupational and Environmental Medicine, 1990
- EXPOSURE OF WELDERS TO FUMES AND GASES IN DUTCH INDUSTRIES: SUMMARY OF RESULTSAnnals of Occupational Hygiene, 1990