Precision pH Sensor Based on WO3 Nanofiber-Polymer Composites and Differential Amplification
Authors:
- Seon-Jin ChoiSCSeon-Jin Choi
- Suchol SavagatrupSSSuchol Savagatrup
- Yoonseob KimYKYoonseob Kim
- Jeffrey H. LangJLJeffrey H. Lang
- Timothy M. SwagerTimothy M. Swager
- 1 October 2019
- journal article
- letter
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 4 (10) , 2593-2598
Abstract
We report a new type of potentiometric pH sensor with sensitivity exceeding the theoretical Nernstian behavior (−59.1 mV/pH). For the pH-sensitive electrode, 1D tungsten oxide (WO3) nanofibers (NFs) were prepared to obtain large surface area and high porosity. These NFs were then stabilized in a reactive porous chloromethylated triptycene poly(ether sulfone) (Cl-TPES) binder, to facilitate proton diffusion into the polymer membrane. The measurements were performed with a differential amplifier using matched MOSFETs and providing a 10-fold amplified signal over a simple potentiometric determination. A high pH sensitivity of −377.5 mV/pH and a linearity of 0.9847 were achieved over the pH range of 6.90–8.94. Improved signal-to-noise ratios with large EMF signal changes of 175 mV were obtained in artificial seawater ranging pH 8.07–7.64 (ΔpH = 0.43), which demonstrates a practical application for pH monitoring in ocean environments.Keywords
Funding Information
- National Oceanic and Atmospheric Administration (2017-R/RCM-50)
This publication has 37 references indexed in Scilit:
- Review on the Versatility of Tungsten Oxide CoatingsPhysica Status Solidi (a), 2019
- Rapid measurement of urease activity using a potentiometric RuO2 pH sensor for detection of Helicobacter pyloriSensors and Actuators B: Chemical, 2017
- Characterization and application of a new pH sensor based on magnetron sputtered porous WO3 thin films deposited at oblique anglesElectrochimica Acta, 2016
- Flexible pH‐Sensing Hydrogel Fibers for Epidermal ApplicationsAdvanced Healthcare Materials, 2016
- WO3 Nanofiber-Based Biomarker Detectors Enabled by Protein-Encapsulated Catalyst Self-Assembled on Polystyrene Colloid TemplatesSmall, 2016
- Integration of tungsten layers for the mass fabrication of WO3-based pH-sensitive potentiometric microsensorsSensors and Actuators B: Chemical, 2015
- Fabrication method and characterization of electrodeposited and heat-treated iridium oxide films for pH sensingSensors and Actuators B: Chemical, 2014
- A solid-state pH sensor based on WO3-modified vertically aligned multiwalled carbon nanotubesElectrochemistry Communications, 2009
- Single tungsten nanowires as pH sensitive electrodesElectrochemistry Communications, 2008
- Modern PotentiometryAngewandte Chemie International Edition, 2007