Fatigue and Reliability Analysis of Unidirectional GFRP Composites under Rotating Bending Loads
- 1 February 2003
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 37 (4) , 317-331
Abstract
Rotating bending fatigue tests have been conducted on unidirectional glass fiber reinforced polyester (GFRP) composites. Standard test specimens were manufactured in form of circular rods with various fiber volume fraction ( Vf) ratios. Failure modes of the composite rods have been examined using scanning electron microscope. The two-parameter Weibull distribution function was used to investigate the statistical analysis of the experimental fatigue life results. Safe design life based on time to first failure (TTFF) concept was calculated at high confidence level γ=0.99 and at two values of reliability, R=0.368 and 0.99. S–N diagrams of mean life, 50% survival life, lower bound life and safe design fatigue life have been constructed for GFRP rods with various values of Vf ratios. These diagrams are of considerable value to the designer specially when the structure contains a critical component where any failure is catastrophic. No rigorous fatigue limit was observed within 107 cycles in these S–N diagrams. The fiber volume fractions have insignificant effect on the slope of the power function that fits the mean fatigue life. At the same number of cycles the stress amplitude required to fracture the specimens with Vf=44.7% was increased by an order equal to 1.58 and1.25 than specimens with Vf=15.8 and 31.8% respectively. The widest scatter was observed at the life range of 105 and 106 cycles for GFRP rode with different Vf ratios. This tendency in the dispersion of fatigue life at varying stress levels is extremely important and deserves much attention for the design and application of GFRP composites.Keywords
This publication has 10 references indexed in Scilit:
- Three Stages of Fatigue Crack Growth in GFRP Composite LaminatesJournal of Engineering Materials and Technology, 2000
- Effect of mean stress on fatigue behaviour of GFRP pultruded rod compositesComposites Part A: Applied Science and Manufacturing, 1997
- Reliability analysis of GFRP pultruded composite rodsInternational Journal of Quality & Reliability Management, 1996
- Effect of fibre volume fraction on the fatigue behaviour of GRP pultruded rod compositesComposites Science and Technology, 1996
- Application of Reliability and Fiber Probabilistic Strength Distribution Concepts to Composite Vessel Burst Strength DesignJournal of Composite Materials, 1992
- Statistical Analysis of Tensile Strength of ARALL® LaminatesJournal of Composite Materials, 1989
- A RELIABILITY ANALYSIS APPROACH TO FATIGUE LIFE DISPERSION OF LAMINATED GLASS FIBER COMPOSITE MATERIALS1980
- Axial Fatigue Failure Sequence and Mechanisms in Unidirectional Fiberglas CompositesJournal of Composite Materials, 1978
- Strength and Elastic Modulus of a Randomly-Distributed Short Fiber CompositeJournal of Composite Materials, 1975
- Time Dependent Static Strength and Reliability for CompositesJournal of Composite Materials, 1970