Effects of Distribution Zone Design on Flow Uniformity and Pressure Drop in PEMFC
Authors:
Open Access
- 1 September 2021
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 168 (9) , 094505
Abstract
A typical flow field plate of proton exchange membrane fuel cells has a distribution zone that connects the input ports and main channel region where major reactions take place. In this study, the effects of two distribution zone designs, i.e., the channel-ridge distribution zone (CRDZ) and dot matrix distribution zone (DMDZ), on the gas distribution uniformity and pressure drop are investigated numerically. For the flow fields with CRDZ, the theoretical mass flow rates and pressure distributions are found to agree with numerical results well. The flow rate distributions in the flow fields become more uniform when the turning angle increases to special angle. To design the flow fields with CRDZ, the channels can be arranged with simple geometry lines in the first step and then optimised with CFD considering the actual size to achieve a more uniform distribution and suitable pressure drop. For the flow fields with DMDZ, the uniformity of gas distribution depends on the shunt and dispersion effects of dot matrix, and the rectification and expansion effects of the distribution chamber. With an increase in porosity of DMDZ, the gas distribution gets better, and it is the most uniform when the distribution zone is an empty chamber.Keywords
Funding Information
- National Key Research and Development Program of China (2017YFB0102702)
- National Key Development Project of New Energy Vehicle Test Program of China (2017YFB0102803)
- National Natural Science Foundation of China (21676207)
- Foshan Xianhu Laboratory Openend Funds (XHD2020-002)
This publication has 42 references indexed in Scilit:
- In situ comparison of water content and dynamics in parallel, single-serpentine, and interdigitated flow fields of polymer electrolyte membrane fuel cellsJournal of Power Sources, 2010
- Determination of the optimal active area for proton exchange membrane fuel cells with parallel, interdigitated or serpentine designsInternational Journal of Hydrogen Energy, 2009
- Investigation of bio-inspired flow channel designs for bipolar plates in proton exchange membrane fuel cellsJournal of Power Sources, 2009
- The effect of serpentine flow-field designs on PEM fuel cell performanceInternational Journal of Hydrogen Energy, 2008
- Fluid dynamics performance of different bipolar platesJournal of Power Sources, 2008
- Flow distribution in the manifold of PEM fuel cell stackJournal of Power Sources, 2007
- Three-Dimensional Analysis of PEMFCs with Different Flow Channel DesignsJournal of the Electrochemical Society, 2006
- Flow distribution in a bipolar plate of a proton exchange membrane fuel cell: experiments and numerical simulation studiesJournal of Power Sources, 2005
- Review of bipolar plates in PEM fuel cells: Flow-field designsInternational Journal of Hydrogen Energy, 2005
- Investigation of fractal flow-fields in portable proton exchange membrane and direct methanol fuel cellsJournal of Power Sources, 2004