Attenuation of Flow Separation Using Herringbone Riblets at M∞=5
Authors:
- 1 January 2019
- journal article
- research article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 57 (1) , 142-152
Abstract
In this Paper, the effect of herringbone riblets as a means of suppressing shockwave-induced flow separation is investigated. A spanwise array of ribleted strips is applied behind the leading edge of a double ramp model placed in a Mach 5 freestream. The high-speed schlieren technique is used to examine the shockwave pattern and the state of the boundary layer developing along the surface of the model. Both pressure-sensitive paints and temperature-sensitive paints are employed to assess the impact of riblets on the interaction between the shockwave and the boundary layer. The results from this experiment show that herringbone riblets are capable of suppressing shock-induced flow separation and hence improving pressure recovery. Furthermore, it is also revealed that these microscale riblets induce large-scale streamwise vortical structures within the boundary layer similar to those observed in incompressible flows. It is believed that these vortices promote momentum transfer within the boundary layer, hence providing the dominant mechanism for suppressing flow separation.Keywords
This publication has 23 references indexed in Scilit:
- A review of the use of vortex generators for mitigating shock-induced separationShock Waves, 2015
- Progress in shock wave/boundary layer interactionsProgress in Aerospace Sciences, 2015
- Review of research into shock control bumpsShock Waves, 2014
- Control of shock unsteadiness in shock boundary-layer interaction on a compression corner using mechanical vortex generatorsShock Waves, 2012
- SBLI control for wings and inletsShock Waves, 2008
- Research at DERA on sub boundary layer vortex generators (SBVGs)2001
- Shock/boundary-layer interaction control with vortex generators and passive cavityAIAA Journal, 1993
- Experimental investigation of normal-shock/turbulent-boundary-layer interactions with and without mass removalAIAA Journal, 1992
- Shock wave/turbulent boundary layer interaction and its controlProgress in Aerospace Sciences, 1985
- Tests of Vortex Generators to Prevent Separation of Supersonic Flow in a Compression Corner1970