Municipal Sewage Sludge Drying Treatment by an Composite Modifier
Author:
Open Access
- 1 January 2012
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2012 (1)
Abstract
A sludge composite modifier (SCM) which comprises a mixture of three cementitious components was proposed for sludge drying and stabilization. Effect of SCM components on sludge moisture content was analyzed using uniform design and the optimum composition of SCM was determined by computer‐aided modeling and optimization. To compare the drying effect of SCM, quicklime, and Portland cement, the effects of material content and curing time on moisture content of sludge were also studied. The results showed that the optimum ratio of modifier component was slag/cement clinker/dihydrate gypsum = 0.64/0.292/0.068 and the moisture content of SCM‐stabilized sludge decreased with the increasing material content and extending curing time. Besides, the experimental results showed that optimized SCM behaved better than quicklime and Portland cement in sludge semi‐drying and XRD analysis revealed that the main hydrated product of stabilization was ettringite, which played an important role in the effective drying process. Sewage sludge stabilized using SCM could be used as an effective landfill cover.Keywords
Funding Information
- Wuhan Polytechnic University
This publication has 14 references indexed in Scilit:
- Gasification of dried sewage sludge: Status of the demonstration and the pilot plantWaste Management, 2012
- Preparation and characterization of carbonaceous adsorbents from sewage sludge using a pilot-scale microwave heating equipmentJournal of Analytical and Applied Pyrolysis, 2012
- Environmental and economical assessment of sewage sludge compost application on soil and plants in a landfillResources, Conservation and Recycling, 2010
- Options for sustainable sewage sludge management in small wastewater treatment plants on islands: The case of CreteDesalination, 2010
- The evaporative drying of sludge by immersion in hot oil: Effects of oil type and temperatureJournal of Hazardous Materials, 2010
- Measurement and simulation of the contact drying of sewage sludge in a Nara-type paddle dryerChemical Engineering Science, 2009
- Extended Dewatering of Sewage Sludge in Solar Drying PlantsDesalination, 2009
- Agronomic and environmental impacts of a single application of heat-dried sludge on an AlfisolScience of The Total Environment, 2005
- Stabilisation and solidification of sewage sludges with Portland cementCement and Concrete Research, 2000
- Solar sludge drying — Based on the IST processRenewable Energy, 1999