Contribution to the 3R Principle: Description of a Specimen-Specific Finite Element Model Simulating 3-Point-Bending Tests in Mouse Tibiae
Open Access
- 25 July 2022
- journal article
- research article
- Published by MDPI AG in Bioengineering
- Vol. 9 (8) , 337
Abstract
Bone mechanical properties are classically determined by biomechanical tests, which normally destroy the bones and disable further histological or molecular analyses. Thus, obtaining biomechanical data from bone usually requires an additional group of animals within the experimental setup. Finite element models (FEMs) may non-invasively and non-destructively simulate mechanical characteristics based on material properties. The present study aimed to establish and validate an FEM to predict the mechanical properties of mice tibiae. The FEM was established based on µCT (micro-Computed Tomography) data of 16 mouse tibiae. For validating the FEM, simulated parameters were compared to biomechanical data obtained from 3-point bending tests of the identical bones. The simulated and the measured parameters correlated well for bending stiffness (R2 = 0.9104, p < 0.0001) and yield displacement (R2 = 0.9003, p < 0.0001). The FEM has the advantage that it preserves the bones’ integrity, which can then be used for other analytical methods. By eliminating the need for an additional group of animals for biomechanical tests, the established FEM can contribute to reducing the number of research animals in studies focusing on bone biomechanics. This is especially true when in vivo µCT data can be utilized where multiple bone scans can be performed with the same animal at different time points. Thus, by partially replacing biomechanical experiments, FEM simulations may reduce the overall number of animals required for an experimental setup investigating bone biomechanics, which supports the 3R (replace, reduce, and refine) principle.Keywords
This publication has 17 references indexed in Scilit:
- A summary of EU national statistical reports of animal experiments in 2014-2016ALTEX, 2019
- WNT1-induced Secreted Protein-1 (WISP1), a Novel Regulator of Bone Turnover and Wnt SignalingJournal of Biological Chemistry, 2015
- Establishing Biomechanical Mechanisms in Mouse Models: Practical Guidelines for Systematically Evaluating Phenotypic Changes in the Diaphyses of Long BonesJournal of Bone and Mineral Research, 2015
- Animal Experiments in Biomedical Research: A Historical PerspectiveAnimals, 2013
- WISP-1/CCN4 regulates osteogenesis by enhancing BMP-2 activityJournal of Bone and Mineral Research, 2010
- Comparison of an inhomogeneous orthotropic and isotropic material models used for FE analysesMedical Engineering & Physics, 2008
- Comparison of quantitative computed tomography-based measures in predicting vertebral compressive strengthBone, 2007
- Finite element models predict cancellous apparent modulus when tissue modulus is scaled from specimen CT-attenuationJournal of Biomechanics, 2004
- Estimation of distal radius failure load with micro-finite element analysis models based on three-dimensional peripheral quantitative computed tomography imagesBone, 2002
- The effect of porosity and mineral content on the Young's modulus of elasticity of compact boneJournal of Biomechanics, 1988