Direct Synthesis and Hydration of Calcium Aluminosulfate (Ca 4 Al 6 O 16 S)
Authors:
- 1 March 2002
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 85 (3) , 535-539
Abstract
Calcium aluminosulfate (Ca 4 Al 6 O 16 S or C 4 A 3 S̄) was prepared by direct synthesis from calcium and aluminum nitrates, and aluminum sulfate. CaAl 4 O 7 (CA 2 ) formed as an intermediate at 900°C, and C 4 A 3 S̄ was the main phase after calcination at 1100°C. The specific surface areas after calcination at 1100° and 1300°C were ∼2.5 and 1 m 2 /g, respectively. Hydration was investigated using XRD, DSC, SEM, conduction calorimetry, and solid‐state 27 Al MAS‐NMR spectroscopy. Calorimetry showed that the induction period was longer than that of a sample prepared using conventional solid‐state sintering, and this was attributed to the formation of amorphous coatings. Crystalline hydration products, principally calcium monoaluminosulfate hydrate and aluminum hydroxide, appeared subsequently. Although the induction period was very long, complete hydration occurred as early as 3 d in the sample calcined at 1100°C and was 91% complete in the sample calcined at 1300°C.Keywords
This publication has 6 references indexed in Scilit:
- Preparation of Portland Cement Components by Poly(vinyl alcohol) Solution PolymerizationJournal of the American Ceramic Society, 1999
- Polymerized Organic‐Inorganic Synthesis of Mixed OxidesJournal of the American Ceramic Society, 1999
- Studies on the formation kinetics of calcium sulphoaluminateCement and Concrete Research, 1994
- Hydration of Calcium Aluminate Cements: A Solid‐State 27 Al NMR StudyJournal of the American Ceramic Society, 1993
- Phase relations in the subsystem of the system referred to hydration of sulphoaluminate cementCement and Concrete Research, 1989
- Kinetics of Hydration of Monocaldum AluminateJournal of the American Ceramic Society, 1986