Toward forced assembly of in situ low‐density polyethylene composites reinforced with low‐Tg phosphate glass fibers: Effects of matrix crystallization and shear deformation
- 4 April 2012
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 52 (10) , 2090-2098
Abstract
This study is aimed at investigating the feasibility of using facile forced assembly methods (temperature and shear strain‐induced orientation of the dispersed phase) to create novel “in situ” low‐density polyethylene (LDPE) composites containing fibrillar inorganic phosphate glass (P‐glass) reinforcing phase during the composite fabrication. Clearly, the experimental results show that unique thermo‐rheological conditions exist under which the “in situ” LDPE composites containing fibrillar P‐glass with potential enhanced benefits can be prepared. DSC results showed that the P‐glass has a moderate nucleating effect on the LDPE crystallization that restricts in situ deformation of the P‐glass during the composite fabrication. Rheo‐optical data showed that a 5% P‐glass/95% LDPE hybrid composition, subjected to a shear rate of 20 s−1 in the parallel plate configuration and 130°C gave “in situ” LDPE composite samples with the largest amount of P‐glass fibers in the limited range of experimental conditions used. This study may spur interests in a better understanding of the potential for the “in situ” reinforcement of engineering plastics with inorganic P‐glasses, at the molecular level, to produce novel “in situ” polymer composites with very high aspect ratios of the reinforcing inorganic phase. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics EngineersKeywords
This publication has 21 references indexed in Scilit:
- Flow-Induced Crystallization: Unravelling the Effects of Shear Rate and StrainMacromolecules, 2010
- Promotion of the γ‐phase of polyamide 6 in its nanocomposite with phosphate glassJournal of Polymer Science Part B: Polymer Physics, 2008
- New phosphate glass/polymer hybrids—Current status and future prospectsProgress in Polymer Science, 2007
- Effect of nucleating additives on crystallization of poly(m‐xylylene adipamide)Polymer Engineering & Science, 2007
- Strain and strain‐rate formulation for flow‐induced crystallizationPolymer Engineering & Science, 2006
- A new route for organic–inorganic hybrid material synthesis through reactive processing without solventPolymer, 2004
- Crystallization kinetics of low‐density polyethylene and polypropylene melt‐blended with a low‐Tg tin‐based phosphate glassJournal of Applied Polymer Science, 2003
- Crystallization kinetics and nucleation activity of silica nanoparticle-filled poly(ethylene 2,6-naphthalate)Polymer, 2003
- Dynamics and Shear Orientation Behavior of a Main-Chain Thermotropic Liquid Crystalline PolymerMacromolecules, 1999
- Observations on the Melt Rheology of Thermotropic Aromatic PolyestersBritish Polymer Journal, 1980