3D Nanorod‐Shaped Binder‐Free Ni 1 − x Fe x Co 2 O 4 Anodes Demonstrate High Performance and Stable Operation Under Accelerated Stress Tests in Anion Exchange Membrane Water Electrolysis
Open Access
- 4 September 2026
- journal article
- research article
- Published by Wiley in Advanced Materials Interfaces
- Vol. 13 (19) , e70664
Abstract
Platinum‐group‐metal‐free catalysts represent a necessary economic choice for industrial‐scale anion exchange membrane (AEM) electrolyzers. A three‐dimensional binder‐free spinel Ni 1 − x Fe x Co 2 O 4 (x = 0.1–0.4) electrocatalyst is synthesized directly on nickel felt via a urea‐mediated sono‐hydrothermal method. The nanorod‐shaped morphology is chosen to reduce mass‐transfer limitations while maintaining catalyst activity. NiFeCo‐2 (20% Fe) offers the optimal balance of iron content, lattice modification, homogeneous nanorod coverage, and surface area, showing the best oxygen evolution reaction (OER) activity, giving 282 mV overpotential at 10 mA cm − 2 and 53 mV dec − 1 Tafel slope. As the anode in an anion exchange membrane water electrolyzer (AEMWE), NiFeCo‐2 reaches 1.748 V at 1 A cm − 2 , 1.92 V at 2 A cm − 2 , and 2.09 V at 4 A cm − 2 in wet cathode mode, and sustains stable operation through two 72‐h accelerated stress test sequences under both wet and dry cathode feeding. Operation starting in dry cathode mode shows better performance retention than in wet mode. Post‐test electron microscopy and textural analysis confirm that the nanorod catalyst layer remains largely preserved, indicating that the observed voltage increase is consistent with resistance growth rather than catalyst loss. These results highlight binder‐free Ni 1 − x Fe x Co 2 O 4 as a promising, affordable anode for AEM water electrolysis.Keywords
Funding Information
- Compagnia di San Paolo
This publication has 46 references indexed in Scilit:
- Elucidating the Degradation Behavior of a 25 cm 2 Pure‐Water‐Fed Non‐Precious Metal Anion Exchange Membrane Water Electrolyzer CellSmall, 2025
- NiMoO 4 @CoFe‐LDH Anode Design to Improve Oxygen Bubble Transport in Dynamic Water ElectrolysisSmall, 2025
- Engineering potential electrocatalysts for both AEM Electrolyzers and Redox Flow Batteries: Design of experiments at the different scalesApplied Thermal Engineering, 2024
- Hierarchical sheet-like W-doped NiCo2O4 spinel synthesized by high-valence oxyanion exchange strategy for highly efficient electrocatalytic oxygen evolution reactionChemical Engineering Journal, 2023
- Hierarchical heterostructure of NiFe2O4 nanoflakes grown on the tip of NiCo2O4 nanoneedles with enhanced interfacial polarization effect to achieve highly efficient electrocatalytic oxygen evolutionChemical Engineering Journal, 2022
- Toward Scalable Production: Catalyst‐Coated Membranes (CCMs) for Anion‐Exchange Membrane Water Electrolysis via Direct Bar CoatingAdvanced Sustainable Systems, 2022
- Comparison of catalyst-coated membranes and catalyst-coated substrate for PEMFC membrane electrode assembly: A reviewChinese Journal of Chemical Engineering, 2021
- Design of controlled-morphology NiCo2O4 with tunable and excellent microwave absorption performanceCeramics International, 2020
- Ternary mixed metal Fe-doped NiCo 2 O 4 nanowires as efficient electrocatalysts for oxygen evolution reactionApplied Surface Science, 2017
- Facilely Tuning Porous NiCo2O4 Nanosheets with Metal Valence‐State Alteration and Abundant Oxygen Vacancies as Robust Electrocatalysts Towards Water SplittingChemistry – A European Journal, 2016