Evolution of the Interelectrode Gap during Co-Rotating Electrochemical Machining
Open Access
Abstract
A new co-rotating electrochemical machining method is presented to machine the complex structure inside annular parts such as flame tubes and aero-engine casings. Due to the unique shape and motion of electrodes, it is difficult to accurately compute the electric field intensity in the machining area. In this paper, the complex electric field model is simplified by conformal transformation, and the analytical solution of electric field intensity is exactly calculated. A material removal model is built on the basis of the electric field model, and the dynamic simulation of the material removal process is realized. The effects of the cathode radius, applied voltage, feed rate and initial interelectrode gap on the interelectrode gap (IEG) and material removal rate (MRR) are analyzed. The simulation results indicate that the MRR is always slightly less than the feed rate in a quasi-equilibrium state, resulting in a slow reduction in IEG. In addition, the final machining state is not affected by the initial IEG, and the MRR in a quasi-equilibrium state is determined by the feed rate. Several comparative experiments were carried out using the optimized processing parameters, in which the MRR and IEG were measured. The convex structures were successfully machined inside the annular workpiece with optimum machining parameters. The experimental results are in good agreement with the theoretical results, indicating that the established model can effectively predict the evolution process of MRR and IEG.Keywords
Funding Information
- National Natural Science Foundation of China (52175414, 51921003, BK20220134)
- National Natural Science Foundation of China for Creative Research Groups (52175414, 51921003, BK20220134)
- Natural Science Foundation of Jiangsu Province of China (52175414, 51921003, BK20220134)
This publication has 44 references indexed in Scilit:
- Thin-Walled Part Machining Process Parameters Optimization based on Finite-Element Modeling of Workpiece VibrationsProcedia CIRP, 2013
- On how tool geometry, applied frequency and machining parameters influence electrochemical microdrillingCIRP Journal of Manufacturing Science and Technology, 2012
- Modelling of the electrochemical machining process by the boundary element methodCIRP Annals, 2010
- Modelling the performance of ECM assisted by low frequency vibrationsJournal of Materials Processing Technology, 2007
- Controlling of metal removal thickness in ECM processJournal of Materials Processing Technology, 2005
- An integrated strategy for materials characterisation and process simulation in electrochemical machiningJournal of Materials Processing Technology, 2003
- Influence of Electrolyte Concentration on Copying Accuracy of Precision-ECMCIRP Annals, 2003
- Ultrasonic measurement of the inter-electrode gap in electrochemical machiningInternational Journal of Machine Tools and Manufacture, 2002
- Modelling and Monitoring Interelectrode Gap in Pulse Electrochemical MachiningCIRP Annals, 1995
- On the determination of current efficiency in electrochemical machining with a variable gapJournal of Materials Processing Technology, 1993