Determination of dendrite coherency point characteristics in Al-Si-Mg alloy
Authors:
- 23 December 2020
- journal article
- research article
- Published by Taylor & Francis in International Journal of Cast Metals Research
- Vol. 34 (1) , 14-20
Abstract
Dendrite coherency or dendrite impingement is an important factor for determining solidification microstructure and casting defects of alloys. In this research, the effect of various cooling rates and Al-5Ti-1B grain refiner contents on the dendrite coherency point (DCP) characteristics of an Al-Si-Mg alloy designated as A357 has been studied. The results showed that both mentioned parameters have a significant influence on DCP of this alloy. Increasing the cooling rate from 0.15 to 1.0 °C/s and the grain refiner content from 0.0 to 3 wt. % increased the solid fraction in where dendrite coherency occurs. Moreover, enhancement of the cooling rate and grain refiner could increase the difference between the liquidus and coherency temperatures (TN–TDCP), about 27 and 26 °C, respectively. The dendrite coherency time decreased by increasing the cooling rate and increased by increasing the grain refiner content.Keywords
This publication has 15 references indexed in Scilit:
- Determination of dendrite coherency point characteristics using first derivative curve versus temperatureJournal of Thermal Analysis and Calorimetry, 2012
- The Interdependence Theory: The relationship between grain formation and nucleant selectionActa Materialia, 2011
- Effect of Grain Refinement on the Dendrite Coherency Point during Solidification of the A319 Aluminum AlloyMetallurgical and Materials Transactions A, 2009
- Effect of the Presence of SiCp on Dendritic Coherency of Al–Si-Based Alloys During SolidificationMaterials and Manufacturing Processes, 2007
- Determination of the Dendrite Coherency Point during Solidification by Means of Thermal Diffusivity AnalysisMetallurgical and Materials Transactions A, 2007
- Grain Refinement of Aluminium Alloys by InoculationAdvanced Engineering Materials, 2003
- Dendrite coherency of Al-Si-Cu alloysMetallurgical and Materials Transactions A, 2001
- Rheological behaviour of the mushy zone and its effect on the formation of casting defects during solidificationActa Materialia, 1998
- Dendrite coherency during equiaxed solidification in binary aluminum alloysMetallurgical and Materials Transactions A, 1995
- Determination of dendritic coherency in solidifying melts by rheological measurementsMaterials Science and Engineering: A, 1993