A Comparative Study on Structural, Morphological, and Tensile Properties of Binary and Ternary Epoxy Resin‐Based Polymer Nanocomposites
Open Access
- 1 January 2020
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2020 (1)
Abstract
In the present work, epoxy resin‐based nanocomposites (NCPs) were fabricated with improved mechanical properties. The epoxy resin (EPR) was mixed with differing amounts of calcium titanate (CaTiO3) nanoparticles (NPs) and glass fiber. The results showed that the ternary system contained glass fiber exhibits low mechanical performance compared to binary [EPR:CaTiO3] system. The effect of fiber glass and NPs on the epoxy resin mechanical behavior was determined by conducting a tensile test for various specimen sets. From the mechanical characterizations, it was seen that there is a monotonic relationship between the NPs concentration and Young’s modulus. Additionally, NCPs samples were brittle in nature and the strain rate significantly decreased upon the addition of CaTiO3 concentration; while the tensile strength was increased. From the X‐ray diffraction evaluation, it can be concluded that the addition of NPs have a great impact on the epoxy structure. Besides, the morphology appearance was in good agreement with structural and mechanical analysis.Keywords
Funding Information
- Ministry of Higher Education and Scientific Research
- University of Sulaimani
This publication has 31 references indexed in Scilit:
- Improved dispersion and mechanical properties of hybrid nanocompositesComposites Science and Technology, 2010
- Influence of aromatic amine hardeners in the cure kinetics of an epoxy resin used in advanced compositesMaterials Research, 2005
- Study of SiO2 Nanoparticles on the Improved Performance of Epoxy and Fiber CompositesJournal of Reinforced Plastics and Composites, 2005
- Epoxy Nanocomposites with Highly Exfoliated Clay: Mechanical Properties and Fracture MechanismsMacromolecules, 2005
- Mechanical and thermal properties of graphite platelet/epoxy compositesPolymer, 2004
- Mechanical Property Characterization of a Polymeric Nanocomposite Reinforced by Graphitic Nanofibers with Reactive LinkersJournal of Composite Materials, 2004
- Polymer nanocomposites: from fundamental research to specific applicationsMaterials Science and Engineering: C, 2003
- Clay‐reinforced epoxy nanocompositesPolymer International, 2003
- Mechanical and electrical properties of a MWNT/epoxy compositeComposites Science and Technology, 2002
- Synthesis and mechanical properties of TiO2-epoxy nanocompositesNanostructured Materials, 1999