Effects of processing parameters on material properties of mechanically processed polyamide
Authors:
- 2 May 1995
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 56 (5) , 557-566
Abstract
A semicrystalline polyamide polymer was processed using a new technique known as mechanical alloying. The material processed by this technique was first introduced into a high‐energy ball mill and ground over long periods of time, resulting in the production of extremely fine powders. These powders were subsequently consolidated well below the materials' melting‐point temperature. The effect of processing parameters including mechanical milling time, consolidation temperature, and the length of consolidation time were studied fairly extensively. The investigation shows that polyamide powders are continually refined with increasing mechanical milling time and the resulting materials have improved mechanical properties. The influence of both consolidation temperature and the length of consolidation time on material properties indicate that materials with higher density, crystallinity, hardness, strength, and ductility are produced when consolidated using higher temperatures and longer times. © 1995 John Wiley & Sons, Inc.Keywords
This publication has 10 references indexed in Scilit:
- Properties of a mechanically processed polymeric materialJournal of Applied Polymer Science, 1994
- Fractal structure of polymer interfacesMacromolecules, 1993
- Cold compaction and sintering of ultrahigh‐molecular‐weight polyethylene containing a segregated iron networkPolymer Engineering & Science, 1989
- Mechanical AlloyingAnnual Review of Materials Science, 1983
- Cold compaction molding and sintering of ultra high molecular weight polyethylenePolymer Engineering & Science, 1980
- A study of the effect of pressure, time, and temperature on high‐pressure powder moldingPolymer Engineering & Science, 1977
- Cold compaction molding and sintering of polystyrenePolymer Engineering & Science, 1976
- An etching technique to reveal the supermolecular structure of crystalline polymersJournal of Polymer Science: Polymer Physics Edition, 1974
- Study of sintering of poly(methyl methacrylate)Journal of Applied Polymer Science, 1970
- Studies on crystallization of high polymers by differential thermal analysisJournal of Polymer Science Part A: General Papers, 1963