Electrochemical Properties of Diluted Al-Mg Alloys With Columnar-To-Equiaxed Transition
Open Access
- 8 March 2022
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 9
Abstract
The objective of the present research is to study the corrosion susceptibility of two Al-Mg diluted alloys (Al-0.5wt.%Mg and Al-2wt.%Mg) with different grains structures obtained by directional solidification (columnar, equiaxed and columnar-to-equiaxed transition, CET) in 0.5% NaCl solution, at room temperature. The corrosion resistance is analyzed by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques in both longitudinal and transversal sections of the samples. The columnar grain zone presents higher corrosion resistance than the equiaxed grain zone. In addition, the transversal section shows higher corrosion resistance than the longitudinal section of the samples. Then, the Al-0.5wt.% Mg alloy displays higher corrosion resistance than the Al-2wt.% Mg alloy. The values of the polarization resistance are used as a basic criterion for the evaluation of the corrosion resistance of both alloys. In this way, when the polarization resistance decreases with the increasing in the distance from the base, the grain size, secondary dendritic arm spacings and hardness increases. In addition, when the polarization resistance increases, the critical temperature gradient decreases.Keywords
Funding Information
- Agencia Nacional de Promoción Científica y Tecnológica
- Consejo Nacional de Investigaciones Científicas y Técnicas
This publication has 45 references indexed in Scilit:
- Pitting corrosion of rheocast A356 aluminium alloy in 3.5wt.% NaCl solutionCorrosion Science, 2013
- EIS and potentiodynamic polarization studies on immiscible monotectic Al–In alloysElectrochimica Acta, 2013
- Improvement of the tensile properties of an Al–Si–Cu–Mg aluminum industrial alloy by using multi stage solution heat treatmentsMaterials Science and Engineering: A, 2013
- An experimental investigation of the columnar-to-equiaxed grain transition in aluminum–copper hypoeutectic and eutectic alloysJournal of Crystal Growth, 2010
- Stable pit formation on AA2024-T3 in a NaCl environmentCorrosion Science, 2010
- Vertical and Horizontal Directional Solidification of Zn-Al and Zn-Ag Diluted AlloysMATERIALS TRANSACTIONS, 2010
- Pitting corrosion of Al and Al–Cu alloys by ClO4− ions in neutral sulphate solutionsElectrochimica Acta, 2008
- Correlation between thermal parameters, structures, dendritic spacing and corrosion behavior of Zn–Al alloys with columnar to equiaxed transitionJournal of Crystal Growth, 2008
- Electrochemical Techniques in Corrosion: Status, Limitations, and NeedsJournal of ASTM International, 2008
- A study on the self-sealing process of anodic films on aluminum by EISSurface and Coatings Technology, 2006