Deposition of Thin SiOx Films by Direct Precursor Injection in Atmospheric Pressure Microwave Torch (TIA)
Open Access
- 26 May 2009
- journal article
- pse proceedings---full-paper
- Published by Wiley in Plasma Processes and Polymers
- Vol. 6 (S1) , S508-S513
Abstract
An axial injection torch (TIA, Torche à Injection Axiale) contained in an open air deposition chamber has been exploited to deposit thin silicon oxide films. The organosilicon precursor, tetramethylsilane (TMS), was injected directly in the plasma gas. A parametric study was carried out to study the effects of microwave power, precursor quantity and torch to substrate distance on the film deposition process. Inorganic films were obtained without the addition of oxygen in the system as the oxygen got incorporated in the plasma from the open air, as shown by optical spectroscopic studies on the plasma. The deposited films were characterised using different techniques like Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), elastic recoil detection analysis (ERDA), Rutherford backscattering spectroscopy (RBS) and nuclear resonance analysis (NRA). These analyses helped understanding the factors affecting the film deposition process. Results show that at short processing time, low microwave plasma power and precursor quantity at an optimised torch to substrate distance, thin non‐porous hydrogenated silicon oxide‐like films can be deposited at low substrate temperatures of around 370 K using this technique.Keywords
This publication has 19 references indexed in Scilit:
- Microwave atmospheric pressure plasma for surface treatment and reactive coating on steel surfacesSurface and Coatings Technology, 2006
- Atmospheric Plasma Deposition of Coatings Using a Capacitive Discharge SourceChemical Vapor Deposition, 2005
- Deposition of SiOx diffusion barriers on flexible packaging materials by PECVDSurface and Coatings Technology, 2005
- Characterization of intrinsic amorphous silicon layers for solar cells prepared at extremely high rates by atmospheric pressure plasma chemical vapor depositionJournal of Non-Crystalline Solids, 2005
- Investigation of deposition temperature effect on properties of PECVD SiOCH low-k filmsThin Solid Films, 2004
- Mechanical durability of ultra-water-repellent thin film by microwave plasma-enhanced CVDThin Solid Films, 2004
- Deposition of silicon dioxide films with a non-equilibrium atmospheric-pressure plasma jetPlasma Sources Science and Technology, 2001
- A new approach to SiO2 deposit using a N2-SiH4-N2O glow dielectric barrier-controlled discharge at atmospheric pressureJournal of Physics D: Applied Physics, 2000
- Thin Films Deposition from Hexamethyldisiloxane and Hexamethyldisilazane under Dielectric-Barrier Discharge (DBD) ConditionsPlasmas and Polymers, 2000
- Plasma-polymerized coatings of trimethylsilane deposited on cold-rolled steel substrates Part 2. Effect of deposition conditions on corrosion performanceProgress in Organic Coatings, 1995