Optimization of process parameters of friction stir welding using desirability function analysis
Authors:
- 15 February 2022
- journal article
- research article
- Published by Taylor & Francis in Welding International
- Vol. 36 (3) , 129-143
Abstract
The latest generation of Aluminum-Lithium alloy (Al-Li) is majorly used in aerospace industries due to its low density and high strength. Friction stir welding is a preferred joining method for the joining of Al-Li alloy due to its low heat input. The quality of the weld is majorly influenced by the process parameters. In the present work, FSW is conducted on Al-Li based alloy AA2099 T8 and studied the effect of process parameters. Objective of this article is to optimize the process parameters for maximizing the tensile strength at a minimum tool wear rate. The process parameters are optimized by the composite desirability analysis coupled with Taguchi L16 orthogonal array. The rotational speed, welding speed, tool profile, and welding condition are considered as the input process parameters. Mathematical models are developed for tensile strength, tool wear rate and composite desirability and the accuracy of the model is found 95.94% and 91.04% and 98.23% respectively. Furthermore, it is observed that the improvement in composite desirability is 11.01% at optimum parameters. Moreover, the improvement in tensile strength and wear rate of tool at optimum parameter (rotational speed 1500 rpm, welding speed 90 mm/min, tool profile cylindrical and welding condition 80 preheated) was observed 5.32% and 1.65% respectively.
Keywords
This publication has 43 references indexed in Scilit:
- Microstructure and mechanical properties of S45C steel prepared by laser-assisted friction stir weldingMaterials & Design (1980-2015), 2013
- Friction Stir Welding of Al Alloys: Analysis of Processing Parameters Affecting Mechanical BehaviorProcedia CIRP, 2013
- The Evolution of Al-Li Base Products for Aerospace and Space ApplicationsMetallurgical and Materials Transactions A, 2012
- Where Does the Lithium Go? – A Study of the Precipitates in the Stir Zone of a Friction Stir Weld in a Li‐containing 2xxx Series Al AlloyAdvanced Engineering Materials, 2010
- Effect of anisotropy on fatigue properties of 2198 Al–Li plates joined by friction stir weldingEngineering Failure Analysis, 2009
- Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi techniqueTransactions of Nonferrous Metals Society of China, 2008
- Effect of welding parameters on tensile properties and fracture behavior of friction stir welded Al–Mg–Si alloyScripta Materialia, 2007
- The Effect of Thermal Exposure on the Mechanical Properties of 2099-T6 Die Forgings, 2099-T83 Extrusions, 7075-T7651 Plate, 7085-T7452 Die Forgings, 7085-T7651 Plate, and 2397-T87 Plate Aluminum AlloysJournal of Materials Engineering and Performance, 2006
- The influence of pin geometry on bonding and mechanical properties in friction stir weld 2014 Al alloyMaterials Letters, 2005
- Use of inoculants to refine weld solidification structure and improve weldability in type 2090 AlLi alloyMaterials Science and Engineering: A, 2000