Risk Exposure during Showering and Water-Saving Showers
Open Access
Abstract
Eco-friendly showers aim to lower energy and water consumption by generating smaller water droplets than those produced by traditional systems. To evaluate the risk of users inhaling the contaminants associated with such water droplets—namely, chemical components or opportunistic bacterial pathogens such as Legionella—we modeled the behavior of water droplets aerosolized by water-atomization technology at a flow rate of 2.2 L/min and compared the results obtained using this model with those determined experimentally in a typical shower stall. Additionally, we monitored the number and mass of inhalable water droplets emitted by twelve showerheads—eight using water-atomization technology and four using continuous-flow technology—which have distinct characteristics in terms of water flow rate, water pressure, spray angle, and number of and diameter of nozzles. The water-atomizing showers tested not only had lower flow rates, but also larger spray angles, less nozzles, and larger nozzle diameters than those of the continuous-flow showerheads. We observed a difference in the behavior of inhalable water droplets between the two technologies, both unobstructed and with the presence of a mannequin. The evaporation of inhalable water droplets emitted by the water-atomization showers favored a homogenous distribution in the shower stall. In the presence of the mannequin, the number and mass of inhalable droplets increased for the continuous-flow showerheads and decreased for the water-atomization showerheads. The water-atomization showerheads emitted less inhalable water mass than the continuous-flow showerheads did per unit of time; however, they generally emitted a slightly higher number of inhalable droplets (1.6 times more), including those large enough to carry a bacterium each—only one model performed as well as the continuous-flow showerheads in this regard. Further experiments are needed to assess whether this slight increase in the number of inhalable water droplets increases the biological risk.Keywords
Funding Information
- Innosuisse - Schweizerische Agentur für Innovationsförderung (26789_1_PFLS-LS)
This publication has 21 references indexed in Scilit:
- Understanding Australian household water-related energy use and identifying physical and human characteristics of major end usesJournal of Cleaner Production, 2016
- Critical review of mathematical approaches for quantitative microbial risk assessment (QMRA) of Legionella in engineered water systems: research gaps and a new frameworkEnvironmental Science: Water Research & Technology, 2016
- Toward the design of low flow-rate multijet impingement spray atomizersExperimental Thermal and Fluid Science, 2014
- Assessment of relative potential for Legionella species or surrogates inhalation exposure from common water usesWater Research, 2014
- Opportunistic pathogens enriched in showerhead biofilmsProceedings of the National Academy of Sciences, 2009
- How far droplets can move in indoor environments ? revisiting the Wells evaporation?falling curveIndoor Air, 2007
- Estimation of endotoxin inhalation from shower and humidifier exposure reveals potential risk to human healthJournal of Water and Health, 2007
- Particle Size Distribution and Inhalation Dose of Shower Water Under Selected Operating ConditionsInhalation Toxicology, 2007
- Continuous Monitoring of Particle Emissions during ShoweringJournal of the Air & Waste Management Association, 2006
- Inhalation exposure model for volatile chemicals from indoor uses of waterAtmospheric Environment. Part A. General Topics, 1992