Mechanical and tribological properties of carbon nanotube reinforced polypropylene composites
Authors:
- 4 April 2016
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 232 (8) , 669-680
Abstract
In this work, carbon nanotube (CNT) reinforced polypropylene (PP) composites (0.5, 1.0, 3.0, and 5.0 wt%) were developed using the melt compounding process. The developed composites were injection-molded into tensile specimens and pins to evaluate the mechanical and tribological properties of the composites. As the CNT content increased, the tensile strength and Young’s modulus of the PP composites increased. The addition of the CNTs to the PP matrix beyond 1 wt% demonstrated agglomeration, and fractured tensile specimens confirmed this behavior. Developed materials demonstrated enhanced crystallinity up to 1 wt% CNT and, subsequently, decreased crystallinity beyond 1 wt% CNT, and an X-ray diffraction investigation confirmed this behavior. The measured coefficient of friction, online wear, and weight loss from the sliding wear test confirmed the least frictional resistance and maximum wear resistance for the 1 wt% CNT–PP composite. As the CNT content increased, the hardness of the CNT–PP composite increased up to 1 wt% CNT and decreased beyond this threshold. The worn-out surfaces of the CNT–PP composite observed using a scanning electron microscope and noncontact three-dimensional profiler confirmed the superior wear resistance of the 1 wt% CNT–PP composite. The CNT–PP composites considered in this study exhibited increased surface temperatures in the sliding wear condition because of the addition of the CNTs. The addition of the CNTs to the PP material increased the thermal conductivity of the composite.Keywords
This publication has 33 references indexed in Scilit:
- One-step hybridization of graphene nanoribbons with carbon nanotubes and its strong-yet-ductile thermoplastic polyurethane compositesPolymer, 2013
- Influence of feeding conditions in twin-screw extrusion of PP/MWCNT composites on electrical and mechanical propertiesComposites Science and Technology, 2011
- High performance polyimide composite films prepared by homogeneity reinforcement of electrospun nanofibersComposites Science and Technology, 2011
- Thermal Degradation and Combustion Behavior of Polypropylene/MWCNT CompositesMolecular Crystals and Liquid Crystals, 2010
- Enhancement of the mechanical properties of polypropylene using polypropylene-grafted multiwalled carbon nanotubesComposites Science and Technology, 2008
- Multi-walled carbon nanotube filled polypropylene nanocomposites based on masterbatch route: Improvement of dispersion and mechanical properties through PP-g-MA additionExpress Polymer Letters, 2008
- The Flexural and Tribological Behavior of Multi-Walled Carbon Nanotube–Reinforced Polyphenylene Sulfide CompositesMATERIALS TRANSACTIONS, 2008
- A study on carbon nanotubes reinforced poly(methyl methacrylate) nanocompositesMaterials Letters, 2005
- Investigation of tribological properties of polyimide/carbon nanotube nanocompositesMaterials Science and Engineering: A, 2004
- Crystallization of Carbon Nanotube and Nanofiber Polypropylene CompositesJournal of Macromolecular Science, Part B, 2003