Model simulation and experimental verification of a new quench detection sensor utilizing second generation high temperature superconductor coated tape
- 23 April 2026
- journal article
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (16) , 165603
Abstract
With the widespread application of second-generation high-temperature superconductors (HTS), the importance of quench detection has become increasingly prominent. To address the challenge of quench detection in HTS operating under strong magnetic fields above 15 T and temperatures above 40 K without reducing the stability margin of HTS, this paper innovatively proposes a HTS coated (HC) quench sensor based on second-generation HTS tape. By implementing a structure without shunt metal, rapid detection of quench voltage is achieved. To validate this innovative concept, a thermoelectric coupling model for quench detection integrating stabilizers, transmission tape, and sensor is constructed. To verify the correctness of the simulation model and assess the practical effectiveness of the sensor, a quench sensor is ingeniously and firstly fabricated using existing HTS tape structure, and a quench detection experiment is conducted with a transmission current of 70 A at a critical current of 69 A. The simulation results show that the detection voltage (Vd) reaches 0.1 V, at 27.5 ms, after the hotspot temperature reaches 90 K, with corresponding hot spot temperatures of 90.13 K. The experimental results indicate that Vd reaches 0.1 V at 76.3 ms. It can be potentially considered that the sensor can detect quench signals of 0.1–0.2 V within 100 ms, with the final maximum hot spot temperatures in both simulation and experiment being less than 122 K. The mutual validation of simulation and experiment confirms the mechanism’s correctness and demonstrates the HC quench sensor’s effect (to be the first of its kind), offering substantial support for HTS’s commercialization.Keywords
Funding Information
- State Key Laboratory of Advanced Electromagnetic Technology (AET 2025KF005)
- Innovation Programs of Southwestern Institute of Physics (202301XWCX005)
This publication has 34 references indexed in Scilit:
- Feasibility study on quench detection methods of Raman and Rayleigh scattering techniques in optical fiber encapsulated HTS coilsPhysica C: Superconductivity and its Applications, 2024
- Acoustic thermometry for detecting quenches in superconducting coils and conductor stacksApplied Physics Letters, 2017
- The effects of superconductor–stabilizer interfacial resistance on quenching of a pancake coil made out of coated conductorSuperconductor Science and Technology, 2011
- Critical current degradation of short YBa2Cu3O7 − δcoated conductor due to an unprotected quenchSuperconductor Science and Technology, 2010
- Detection of AE signals from a HTS tape during quenching in a solid cryogen-cooling systemPhysica C: Superconductivity and its Applications, 2010
- Quench detection method for 2G HTS wireSuperconductor Science and Technology, 2010
- Finite-element modelling of YBCO fault current limiter with temperature dependent parametersSuperconductor Science and Technology, 2007
- Lattice and electronic specific heat of YBa2Cu3O7Physica C: Superconductivity and its Applications, 1989
- Electrical resistivity of copper, gold, palladium, and silverJournal of Physical and Chemical Reference Data, 1979
- Thermal Conductivity of the ElementsJournal of Physical and Chemical Reference Data, 1972