Selective Elastane Removal Using DMSO–DBN Under Moderate Temperatures: From Pure Filaments to Cotton/Polyester Blends
Open Access
Abstract
Selective removal of elastane from textile blends is a critical factor for fibre-to-fibre recycling, since even low elastane content compromises the mechanical shredding efficiency, contaminates recycled streams, and limits the spinnability of recovered fibres. In this work, we investigate dimethyl sulfoxide (DMSO) as a solvent system for elastane degradation under moderate temperatures, both in the absence and in the presence of the organic base catalyst 1,5-diazabicyclo[4.3.0]non-5-ene (DBN). DMSO alone promoted only partial elastane mass loss, typically 26–32% at 80–100 °C (60 min) and up to 79% at 120 °C (10 min), whereas the addition of 0.1% v/v DBN enabled near-complete or complete mass loss (81–100%) across 80–120 °C within 10–60 min. Complete removal of elastane was achieved in isolated elastane filaments at 100 °C within 30–60 min, and the same treatment conditions were applied to real mixtures of pre-consumer textile waste containing 94% cotton/6% elastane and 87% polyester/13% elastane, leading to permanent dimensional relaxation of the resulting fabrics with area increases of approximately 9–14% and 7–13%, respectively, consistent with the loss of elastane-driven elastic recovery. Scanning electron microscopy (SEM), tensile testing, and dimensional analysis confirmed selective disruption of the elastane, a loss of elastic recovery, and largely preserved morphology and tensile strength of the cotton and polyester fibres. Dimensional change in the treated fabrics served as an indirect indicator of elastane degradation, correlating with the loss of elasticity observed in both blends. In summary, the DMSO–DBN system provides an energy-efficient, controllable, and scalable route for elastane degradation under comparatively mild conditions, thereby contributing to fibre-to-fibre recycling strategies and the advancement of circular textile manufacturing.Keywords
Funding Information
- IAPMEI—Agency for Competitiveness and Innovation, I.P. (01/C05-i09/2024.PC644933224-00000043)
- Portuguese Foundation for Science and Technology
- Recovery and Resilience Plan (PRR) through NextGenerationEU from the European Union (UID/00264/2025)
- Recovery and Resilience Plan (PRR) through NextGenerationEU from the European Union (UID/PRR/00264/2025)
This publication has 24 references indexed in Scilit:
- Solvent blends for selective elastane dissolution and recovery from mixed polyamide fabricsResources, Conservation and Recycling, 2023
- New separation process for elastane from polyester/elastane and polyamide/elastane textile wasteResources, Conservation and Recycling, 2023
- Investigation on microfiber release from elastane blended fabrics and its environmental significanceScience of The Total Environment, 2023
- Efficient recycle of waste poly-cotton and preparation of cellulose and polyester fibers using the system of ionic liquid and dimethyl sulfoxideJournal of Molecular Liquids, 2023
- Analysing the potential of the selective dissolution of elastane from mixed fiber textile wasteResources, Conservation and Recycling, 2023
- A novel quantification tool for elastane in textiles using thermal treatmentPolymer Testing, 2022
- Review on the pyrolysis products and thermal decomposition mechanisms of polyurethanesJournal of Analytical and Applied Pyrolysis, 2022
- Biocatalysis in the Recycling Landscape for Synthetic Polymers and Plastics towards Circular TextilesChemSusChem, 2021
- Synthesis and characterization of waterborne polyurethane containing UV absorption group for finishing of cotton fabricsJournal of Industrial and Engineering Chemistry, 2014
- FTIR, 1H‐NMR spectra, and thermal characterization of water‐based polyurethane/acrylic hybridsJournal of Applied Polymer Science, 2007