A Fully Programmable DAQ Board of Vibrational Signals from IEPE Sensors: Hardware and Software Design, Performance Analysis
Open Access
- 24 March 2024
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 13 (7) , 1187
Abstract
Vibration analysis is commonly used to assess machinery conditions, earthquake detection, and structural monitoring. Commercially available DAQs (Data Acquisition Systems) feature high costs and limited versatility in terms of end-user hardware/firmware customization, making it difficult to adapt them to the input signal features and add supplementary functionalities. Hence, this research aims to develop a custom acquisition board for detecting vibration signals via IEPE (Integrated Electronic Piezoelectric) sensors, considering the limitations of commercially available systems, and building upon solutions found in the literature. The DAQ board was intended for remote vibration monitoring of infrastructure and machinery for industrial applications, allowing the implementation of predictive maintenance strategies. The proposed DAQ board has two independent and fully configurable channels, which can be set for acquiring signals from IEPE sensors or generic voltage sources. The DAQ board relies on the STM32F401 microcontroller to manage the acquisition from high-speed ADCs, process data, and store them in mass memory (SD card). During acquisition, the DAQ implements a batch acquisition strategy based on a buffer flash memory for temporarily storing ADCs data, which are iteratively poured into mass memory. Also, the board has Bluetooth connectivity to transmit acquired data and receive commands remotely. A prototype of the DAQ board was developed and tested with several waveforms, including vibration signals. The tests showed that the board can acquire vibration signals and compute the FFT onboard. The DAQ demonstrated a good balance between performance, accuracy, flexibility, and cost, making it suitable for several industrial applications and allowing for scalability and integration potential.Keywords
This publication has 17 references indexed in Scilit:
- Runway Pavement Structural Analysis Using Remote Laser Doppler VibrometersApplied Sciences, 2023
- A Novel Scalable Digital Data Acquisition System for Industrial Condition MonitoringIEEE Transactions on Industrial Electronics, 2023
- Accuracy Characterization of a MEMS Accelerometer for Vibration Monitoring in a Rotating FrameworkApplied Sciences, 2023
- A smart sensor-based monitoring system for vibration measurement and bearing fault detectionMeasurement Science and Technology, 2020
- Low-Cost, High-Frequency, Data Acquisition System for Condition Monitoring of Rotating Machinery through Vibration Analysis-Case StudySensors, 2020
- Development of a Low-Cost Vibration Measurement System for Industrial ApplicationsMachines, 2019
- Low Cost Data Acquisition System for Condition Assessment of Electric MotorsIARJSET, 2018
- Design and realization of multi-channel wireless data acquisition system for laboratory-scale experiments on structural health monitoringJournal of Measurements in Engineering, 2018
- A Novel Wireless Accelerometer Board for Measuring Low-Frequency and Low-Amplitude Structural VibrationIEEE Sensors Journal, 2016
- Real-time analysis and interpretation of continuous data from structural health monitoring (SHM) systemsBulletin of Earthquake Engineering, 2014