Performance of Recycled Polylactic Acid/Amorphous Polyhydroxyalkanoate Blends
Open Access
Abstract
Blends of polylactic acid (PLA) with amorphous polyhydroxyalkanoate (aPHA) are less brittle than neat PLA, thus enabling their use as biodegradable packaging. This work investigated the impact of recycling on the properties of neat PLA and PLA/aPHA blends with 90 and 75 wt. % PLA. After the materials were subjected to five heat histories in a single-screw extruder, the mechanical, rheological, and thermal properties were measured. All recycled compounds with 100% PLA and 75% PLA had similar decomposition behavior, whereas the decomposition temperatures for the blends with 90% PLA decreased with each additional heat cycle. The glass transition and melting temperatures were not impacted by reprocessing, but the crystallinity increased with more heat cycles. The complex viscosity of the reprocessed PLA and PLA/aPHA blends was much lower than for the neat PLA and increasing the number of heat cycles produced smaller reductions in the complex viscosity of 100% PLA and the blend with 90% PLA; no change in complex viscosity was observed for blends with 75% PLA exposed to 2 to 5 heat cycles. The tensile properties were not affected by reprocessing, whereas the impact strength for the 75% PLA blend decreased with reprocessing. These properties suggest that users will be able to incorporate scrap into the neat resin for thermoformed packaging.Keywords
Funding Information
- CJ Biomaterials
This publication has 35 references indexed in Scilit:
- Multiple recycling of a PLA/PHB biopolymer blend for sustainable packaging applications: Rheology‐morphology, thermal, and mechanical performance analysisPolymer Engineering & Science, 2022
- Poly(ε‐caprolactone): A potential polymer for biodegradable food packaging applicationsPackaging Technology and Science, 2021
- Functional Properties of Plasticized Bio-Based Poly(Lactic Acid)_Poly(Hydroxybutyrate) (PLA_PHB) Films for Active Food PackagingFood and Bioprocess Technology, 2017
- Mechanical Recycling of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)/Polylactide Based BlendsJournal of Polymers and the Environment, 2014
- Ternary PLA–PHB–Limonene blends intended for biodegradable food packaging applicationsEuropean Polymer Journal, 2014
- Improvement of blown film extrusion of poly(Lactic Acid): Structure–Processing–Properties relationshipsPolymer Engineering & Science, 2013
- Crystallization behavior of poly(lactide)/poly(β‐hydroxybutyrate)/talc compositesJournal of Applied Polymer Science, 2013
- Blending polylactic acid with polyhydroxybutyrate: The effect on thermal, mechanical, and biodegradation propertiesAdvances in Polymer Technology, 2011
- An overview of the recent developments in polylactide (PLA) researchBioresource Technology, 2010
- Rheology and processing of gluten based bioplasticsBiochemical Engineering Journal, 2005