Friction coefficient and surface roughness of TiN‐coated HSS deposited using cathodic arc evaporation PVD technique
Authors:
- 2 May 2008
- journal article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 60 (3) , 121-130
Abstract
Purpose – The purpose of this paper is to examine the effect of substrate temperature on friction coefficient and surface roughness of titanium nitride (TiN) coatings deposited on high-speed steel (HSS) using commercially available cathodic arc evaporation physical vapour deposition system. Design/methodology/approach – The goal of this work is to determine the usefulness of TiN coatings in order to improve the friction coefficient and surface roughness of HSS verses substrate temperature, as vastly used in cutting tool industry and many others. A Pin-on-Disc test was carried out to study the coefficient of friction verses sliding distance. Surface roughness of deposited coatings was studied via surface roughness tester and atomic force microscope (AFM). Findings – Friction coefficient increased at higher temperature as compared to the coating deposited at lower substrate temperature. Surface roughness measured via both instruments showed similar trend in recorded data and, i.e. increased by increasing substrate temperature. AFM study showed that bearing ratio (per cent) decreased, whereas, fractal dimension increased with an increase in substrate temperature. Research limitations/implications – It is implied that choosing a substrate temperature above 450°C in the existing coating system could damage some machine parts. Practical implications – This scenario develops an approach to optimize the coating properties verses substrate temperature for specific application, such as cutting tools for automobiles and aircrafts. Originality/value – The coating deposited at lower temperature showed better friction coefficient and surface roughness than the coating deposited at higher temperature and vice versa.Keywords
This publication has 44 references indexed in Scilit:
- Application of response surface methodology in the optimization of cutting conditions for surface roughnessJournal of Materials Processing Technology, 2005
- Nanotribological properties of CN/TiCN/TiN/Si multilayer as determined by AFMNanotechnology, 2005
- Properties of TiN coating on 45 # steel for inner surface modification by grid-enhanced plasma source ion implantation methodChinese Physics, 2004
- The structure and tribological properties of gradient layers prepared by plasma-based ion implantation on 2024 Al alloyJournal of Physics D: Applied Physics, 2004
- Near-surface composition and tribological behaviour of plasma nitrided titaniumJournal of Physics D: Applied Physics, 2003
- The characterization of TiN thin films using optical reflectivity measurementsJournal of Physics D: Applied Physics, 2002
- N/sub 2/ gas absorption in cathodic arc apparatus with an Al cathode under medium vacuumIEEE Transactions on Plasma Science, 1999
- Macroparticles in films deposited by steered cathodic arcJournal of Physics D: Applied Physics, 1996
- High energy xenon ion beam assisted deposition of TiN film and its industrial applicationJournal of Materials Science, 1996
- Measuring the nanomechanical properties and surface forces of materials using an atomic force microscopeJournal of Vacuum Science & Technology A, 1989