The work is devoted to the identification and analysis of the regularities of the modification of the elemental and phase composition, defective substructure and mechanical properties of carbon steel subjected to complex processing, combining the samples surface layer saturation with aluminum and subsequent nitriding. The material used for the study was carbon AISI 1020 steel (20 Steel), which in the initial state has a ferrite-pearlite structure. The complex modification was carried out in a single vacuum space on the TRIO installation with a chamber size of 600×600×600 mm3, equipped with a switching unit to implement of the elion (electron-ion) mode. Alumunizing was carried out at a temperature of 963 K and during 4 hours. The cathode of the arc evaporator was made of A7 aluminum alloy (98.8% Al). Subsequent nitriding of the aluminized layer was carried out at a temperature of 803 K for 2 hours. It was found that as a result of complex processing, a modified layer up to 80 μm thick was formed. It is shown that the complex modification of carbon steel is accompanied by the formation of a multiphase submicro- and nanostructure state containing iron nitrides of Fe4N and Fe3N composition and aluminum - AlN. The hardness of steel is maximum on the modificated surface and exceeds that of the initial material by 4 times. The wear resistance of the modified layer is higher by 2.5 times than that of steel in the initial state.