Thermal and mechanical properties of woodflour/tannin adhesive composites
- 15 January 2004
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 91 (5) , 3074-3082
Abstract
Composite materials formulated with a natural polyphenolic matrix (commercial tannin adhesive made from quebracho tannin extract), pine woodflour as reinforcing material, and hexamethylenetetramine as hardener were prepared and tested. Scanning electron microscopy of fractured samples was used to analyze the efficiency of the wetting and adhesion of the filler to the surrounding matrix. Thermogravimetric analysis was used in the thermal characterization of the woodflour and the tannin extract. Flexural, compression, and dynamic‐mechanical tests were performed on composites to study the relationship of the filler content and particle size with the composite final properties. Moreover, the influence of the moisture content on the physical and mechanical properties of the different composites was analyzed. Results indicated that the mechanical properties were severely affected by the absorbed moisture. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3074–3082, 2004Keywords
This publication has 10 references indexed in Scilit:
- Moisture diffusion in polyester–woodflour compositesPolymer, 1999
- Hexamine hardener behaviour: effects on wood glueing, tannin and other wood adhesivesEuropean Journal of Wood and Wood Products, 1999
- Polycondensation and autocondensation networks in polyflavonoid tannins. II. Polycondensation versus autocondensationJournal of Applied Polymer Science, 1998
- Mechanical properties and morphology of impact modified polypropylene-wood flour compositesJournal of Applied Polymer Science, 1998
- Analytical Studies on Tara TanninsHolzforschung, 1997
- Fortified mangrove tannin-based plywood adhesiveJournal of Applied Polymer Science, 1996
- Composites from sawdust and unsaturated polyesterJournal of Applied Polymer Science, 1996
- Phenol-Formaldehyde Plywood Adhesive Resins Prepared With Liquefied Bark of Black Wattle(Acacia mearnsii)Journal of Wood Chemistry and Technology, 1996
- Mechanism of polyphenolic tannin resin hardening by hexamethylenetetramine: CP–MAS 13C‐NMRJournal of Applied Polymer Science, 1995
- Acetosolv Lignins from Bagasse: Characterization by TG and DTAPolymer-Plastics Technology and Engineering, 1992