Effect of laser beam trajectory on pocket geometry in laser micromachining
Authors:
Open Access
- 2 October 2020
- journal article
- research article
- Published by Walter de Gruyter GmbH in Open Engineering
- Vol. 10 (1) , 830-838
Abstract
The article presents the problem of planning the laser beam trajectory for the laser micromachining process. The article concerns on the ablative laser micromachining issues. Different effects of laser beam trajectory on pocket geometry in laser micromachining were investigated. The results of experimental tests are presented. Based on the research, potential causes of different effects of the laser beam for various trajectories were formulated. Several different types of trajectories for the assumed shape were developed for the purposes of the research. Laser micromachining was performed with fixed parameters of the laser device using different trajectories. The article indicates the significant impact of the laser beam trajectory on the effect of interaction on matter during the laser milling process, which is not often mentioned in scientific reports. The article presents the basic geometrical measurements indicating the need to determine the leading of the laser beam. Studies were conducted using the microscopic observation methods and interferometric methods for estimating the surface condition. The article indicates the need for extensive research focusing on the mechanism of the impact of the laser beam scan strategy on the effect on the material during ablative laser machining. The article summarizes the analysis and discussion of research results.Keywords
This publication has 13 references indexed in Scilit:
- Utilization of the UV laser with picosecond pulses for the formation of surface microstructures on elastomeric plasticsIOP Conference Series: Materials Science and Engineering, 2017
- Laser milling of martensitic stainless steels using spiral trajectoriesOptics and Lasers in Engineering, 2017
- Laser micro-milling of microchannel on copper sheet as catalyst support used in microreactor for hydrogen productionInternational Journal of Hydrogen Energy, 2014
- Pulsed Laser Ablation of Solids2014
- Laser Milling of the Intractable MaterialsProcedia CIRP, 2013
- Laser Treatment of Electro-Spark Coatings Deposited in the Carbon Steel Substrate with using Nanostructured WC-Cu ElectrodesPhysics Procedia, 2012
- Laser Treatment of Cu-Mo Electro-Spark Deposited CoatingsPhysics Procedia, 2011
- Femtosecond laser for black silicon and photovoltaic cells2008
- Laser Ablation and its Applications2007
- Laser micro-milling of ceramics, dielectrics and metals using nanosecond and picosecond lasers2006