Synergistic enhancement of arc ablation resistance and mechanical properties of epoxy resin insulation
Authors:
- 25 May 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 27 (3) , 748-756
Abstract
Arc ablation is one of the important inducements leading to the surface insulation failure of epoxy resin (EP) break insulation in a HVDC circuit breaker. As a promising method to enhance the arc ablation resistance of EP insulation, the use of heat-conducting nano-fillers has always been confronted with the contradiction between the enhancement of thermal properties and that of mechanical strength. Up to now, the ablation characteristics of EP nanocomposite under short-time partial arc ablation is still poorly understood, and the synergistical enhancement of arc ablation resistance and mechanical strength of EP insulation is not realized as yet. Focused on these uncharted areas, in this work, we prepared a novel EP nanocomposite by blending method using dopamine-modified h-BN flakes and rigid α-Al 2 O 3 microsphere as binary modifiers. The results indicate that, though the arc ablation resistance of EP insulation can be improved to some extent after introducing functionalized h-BN, however, the tensile strength decreases significantly. In comparison, the h-BN&α-Al 2 O 3 binary nanofillers may not only improve the apparent activation energy of EP insulation in thermal decomposition, but also regulate the interfacial interaction between particle swarms and EP matrix. This is beneficial to relieve the partial carbonization on the insulation surface thereby improving the toughness of the composite, which provides a feasible method to synergistically enhance the multiple properties of EP insulation.Keywords
This publication has 23 references indexed in Scilit:
- Sandwiched epoxy–alumina composites with synergistically enhanced thermal conductivity and breakdown strengthJournal of Materials Science, 2017
- Texture Analyses of Ti/Al2O3 Nanocomposite Produced Using Friction Stir ProcessingMetallurgical and Materials Transactions A, 2016
- Poly(dopamine) assisted epoxy functionalization of hexagonal boron nitride for enhancement of epoxy resin anticorrosion performancePolymers for Advanced Technologies, 2016
- Improved ablation resistance of carbon–phenolic composites by introducing zirconium silicide particlesComposites Part B: Engineering, 2015
- Epoxy/BN micro- and submicro-composites: dielectric and thermal properties of enhanced materials for high voltage insulation systemsIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Thermal conductivity enhancement with different fillers for epoxy resin adhesivesApplied Thermal Engineering, 2014
- Nano–micro structure of functionalized boron nitride and aluminum oxide for epoxy composites with enhanced thermal conductivity and breakdown strengthRSC Advances, 2014
- Processable 3-nm thick graphene platelets of high electrical conductivity and their epoxy compositesNanotechnology, 2014
- HVDC Circuit Breakers: A Review Identifying Future Research NeedsIEEE Transactions on Power Delivery, 2011
- Effect of nano TiO2 particle size on mechanical properties of cured epoxy resinProgress in Organic Coatings, 2010