- 16 January 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
Abstract
The magnetic field is an outstanding experimental tool for physics. To go beyond the conventional commercially available superconducting (SC) magnets, very large infrastructures such as the ones gathered within the European Magnetic Field Laboratory (EMFL) are necessary. The SuperEMFL project is a design study aiming at providing the European high field user community with much higher superconducting fields. This is meant to be achieved by combining high temperature superconductor (HTS) insert magnets, an emerging technology that can work in fields above 25 T, with low temperature superconductor (LTS) outsert magnets, a technology limited to fields below 25 T. The project has two design magnetic field targets, 32+T and 40+T. The first design target proposed to combined a single stack of HTS pancakes in combination with a 19 T / 150 mm LTS magnet; the second either a similar arrangement at the sake of a narrower central space or a design with two nested HTS coils combined with a 15 T/ 250 mm LTS magnet. The particular choice of the project is to use no insulation but a metallic tape co-wound with the bare HTS tape. This so-called Metal as Insulation (MI) technology enables a self-protection feature of the HTS coil by allowing the electrical bypass of defects as well as better mechanical performances in a very compact winding. The use of HTS inserts introduces a change of paradigm by providing an unprecedented combination of high magnetic field and long measurement times whilst saving vast amounts of energy in operation.Keywords
Funding Information
- European Magnetic Field Laboratory (PIA3 FASUM ANR-21-ESRE-0027)
- European Union’s Horizon 2020 Research and Innovation Programme (951714)
This publication has 24 references indexed in Scilit:
- Development and construction of magnet system for world’s first full high temperature superconducting tokamakSuperconductivity, 2024
- Screening-current-induced mechanical strains in REBCO insert coilsSuperconductor Science and Technology, 2021
- 38 mm diameter cold bore metal-as-insulation HTS insert reached 32.5 T in a background magnetic field generated by resistive magnetCryogenics, 2020
- World record 32.35 tesla direct-current magnetic field generated with an all-superconducting magnetSuperconductor Science and Technology, 2020
- 45.5-tesla direct-current magnetic field generated with a high-temperature superconducting magnetNature, 2019
- First performance test of a 25 T cryogen-free superconducting magnetSuperconductor Science and Technology, 2017
- 26 T 35 mm all-GdBa2Cu3O7–xmulti-width no-insulation superconducting magnetSuperconductor Science and Technology, 2016
- Electro-mechanical properties of REBCO coated conductors from various industrial manufacturers at 77 K, self-field and 4.2 K, 19 TSuperconductor Science and Technology, 2015
- 35.4 T field generated using a layer-wound superconducting coil made of (RE)Ba2Cu3O7−x (RE = rare earth) coated conductorApplied Physics Letters, 2011
- Properties of recent IBAD–MOCVD coated conductors relevant to their high field, low temperature magnet useSuperconductor Science and Technology, 2010