Evaluation of Damage Limit State for RC Frame Based on FE Modeling
Open Access
Abstract
Many damage limit states have been defined to characterize the extent of damages occurred in RC frame. Some of the damage limit states are defined by models that relate the limit states with the control points. Both control points and the limit state are expressed in term of response quantities. This research aims to evaluate the validity of such models by identifying the defined damage limit state with the corresponding damage based on FE modeling. The FE modeling provides a direct link between the damage and the response quantities. This link can be exploited as a basis for the evaluation. Based on the evaluation, this study proposed modified damage limit states. The response quantities with its corresponding progressive damage from FE simulation will also be used to inspect whether damage that can be expected to occur in the model structure is within the range estimated by the code based approach (CBA) damage limit state. Finally, fragility curves are constructed to assess the probability of the expected damage in the model structure under Design Basis Earthquake (DBE) and Maximum Considered Earthquake (MCE) scenarios. Utilizing the proposed damage limit states, the most probable damage in the structure falls in the category of slight if an earthquake at a level of DBE or MCE strikes the structure. However, at MCE level the probability of moderate damage attains 35%, or an increase by 23% compared to the DBE level.Keywords
Funding Information
- Kementerian Riset, Teknologi dan Pendidikan Tinggi (221.1/UN27.22/HK.07.00/2021)
This publication has 36 references indexed in Scilit:
- The Research on Modified Park-Ang Damage Model Based on Effective Energy DissipationAdvanced Materials Research, 2013
- Structural damages observed in state buildings after Simav/Turkey earthquake occurred on 19 May 2011Natural Hazards and Earth System Sciences, 2012
- Acceptance limits for performance‐based seismic design of RC walls for low‐rise housingEarthquake Engineering & Structural Dynamics, 2012
- A Proposed Rapid Visual Screening Procedure for Seismic Evaluation of RC‐Frame Buildings in IndiaEarthquake Spectra, 2010
- Seismic assessment of an industrial frame structure designed according to Eurocodes. Part 2: Capacity and vulnerabilityEngineering Structures, 2005
- Correlation study between seismic acceleration parameters and damage indices of structuresEngineering Structures, 2001
- 6. Development of Building Damage Functions for Earthquake Loss EstimationEarthquake Spectra, 1997
- Seismic damage indices for RC buildings: evaluation of concepts and proceduresProgress in Structural Engineering and Materials, 1997
- Seismic damage assessment and basis for damage-limiting designProbabilistic Engineering Mechanics, 1988
- Mechanistic Seismic Damage Model for Reinforced ConcreteJournal of Structural Engineering, 1985