Solubility of additives: Grafting of itaconic acid onto LDPE by reactive extrusion. II. Effect of stabilizers
- 16 July 2001
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 81 (14) , 3439-3448
Abstract
Static and dynamic mixers set on the Brabender plastograph were used to investigate the grafting of itaconic acid (IA) onto low‐density polyethylene (LDPE) by the reactive extrusion. The initiators of free‐radical reactions were monoperoxide 2,5‐dimethyl‐2‐hydroxy‐5‐tert‐butylperoxy‐3‐hexyne and diperoxide 2,5‐dimethyl‐2,5‐di(tert‐butyl peroxy)‐hexane. The reaction mix contained stabilizers of phenolic type as follows: 2,6‐ditert‐butyl‐4‐methyl phenol; ester of 3,5‐ditert‐butyl‐4‐hydroxyphenyl‐propanoic acid and pentaerythritol; 4‐alkoxy‐2‐hydroxy‐benzophenone; and 1,4‐dihydroxybenzene. The effect of stabilizers, which follow the radical mechanism on the grafting of IA and on the crosslinking, depends on their solubility in the polymer and the monomer. The stabilizers (e.g., 1,4‐dihydroxybenzene) with increased affinity toward the monomer reduce the grafting yield and inhibit crosslinking. At 0.3–0.5 wt % of the stabilizer insoluble in the monomer, the grafting yield can be increased, while inhibiting the LDPE‐g‐IA crosslinking, irrespective of the peroxide used. Hence, classical stabilizers can initiate grafting reactions at raised concentrations, temperatures, and application of the shearing stresses. They also help to obtain a high‐grafting yield and a reduced crosslinking degree. A stabilizer, having a close affinity toward LDPE, influences the LDPE‐g‐IA structure. The stabilizer content of 0.5 wt % transforms the topological structure of LDPE‐g‐IA into uniblock. Its molecular weight distribution (MWD) may be narrow (−Mn/−Mw < 2) or broad (−Mn/−Mw > 2), depending on the concentration of the initiator used. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3439–3448, 2001Keywords
This publication has 26 references indexed in Scilit:
- Oxidation of LDPE and LDPE grafted with itaconic acid, in contact with waterPolymer, 2000
- Investigation of molecular structure of LDPE modified by itaconic acid graftingJournal of Applied Polymer Science, 1999
- Itaconic acid grafting on LDPE blended in molten stateJournal of Applied Polymer Science, 1997
- Melt grafting of glycidyl methacrylate onto polypropylene and reactive compatibilization of rubber toughened polypropylenePolymer Engineering & Science, 1996
- Reactive extrusion: A new tool for the diversification of polymeric materialsMacromolecular Symposia, 1994
- Bulk functionalization of ethylene‐propylene copolymers. IV. A theoretical approachJournal of Applied Polymer Science, 1992
- Polypropylene/polyethylene terephthalate blends compatibilized through functionalizationPolymer Engineering & Science, 1990
- Bulk functionalization of ethylene–propylene copolymers. II. Influence of the initiator concentration and of the copolymer composition and chain microstructure on the reaction kineticsJournal of Applied Polymer Science, 1989
- Radical‐catalyzed homopolymerization of maleic anhydride in presence of polar organic compoundsJournal of Polymer Science Part A: Polymer Chemistry, 1988
- Mechanical properties and permeability of polypropylene and poly(ethylene terephthalate) mixturesPolymer Engineering & Science, 1987