Tailoring solid‐state synthesis routes for high confidence production of phase pure, low impedance Al‐LLZO
Authors:
- 23 January 2023
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (5) , 2786-2796
Abstract
Lithium lanthanum zirconium oxide (LLZO) garnet is a solid‐state lithium ion conducting electrolyte promising all‐solid‐state batteries (ASSB) with high charge rates and good energy density due to its chemical stability against lithium metal anodes. LLZO has a high room temperature Li ion conductivity of ∼0.1–1 mS/cm in its cubic phase, but the stability of the cubic phase and ionic conductivity are highly sensitive to lithium stoichiometry. Stabilizing agents such as aluminum oxide and excess lithium are needed to preserve the cubic phase and compensate for lithium volatility. With the range of the end LLZO products spanning powders, porous membranes to dense membranes combined with sintering/calcination that often exceeds 1000°C, it is challenging to maintain an ideal lithium content given its high volatility from a single base powder. This study was designed to elucidate the sensitivities of aluminum doped LLZO powder synthesis and processing along its path to being utilized in a ceramic‐manufacturing optimized ASSB. By utilizing thermogravimetric analysis in conjunction with in situ X‐ray diffraction analysis of solid‐state LLZO synthesis, it was discovered that the sensitivity of the LLZO cubic phase to lithium volatility can be reduced via early incorporation of excess lithium carbonate during initial phase formation in direct combination with controlled surface‐to‐volume ratios of the powders. Isostatically pressed powders of our LLZO sintered at 1100°C for 2 h showed RT ionic conductivity of 0.3–0.4 mS/cm measured via electrochemical impedance spectroscopy, and an improvement in microstructural uniformity with lowered porosity. The improved suppression of lithium volatilization has important implications for the scalable production of LLZO powders and assembly of ASSBs.Keywords
This publication has 30 references indexed in Scilit:
- Phase formation of a garnet-type lithium-ion conductor Li7−3Al La3Zr2O12Solid State Ionics, 2015
- Nitrogen-free sol–gel synthesis of Al-substituted cubic garnet Li7La3Zr2O12 (LLZO)Journal of Power Sources, 2015
- Effect of calcining and Al doping on structure and conductivity of Li 7 La 3 Zr 2 O 12Solid State Ionics, 2014
- Phase transformation of the garnet structured lithium ion conductor: Li7La3Zr2O12Solid State Ionics, 2014
- Excess lithium salt functions more than compensating for lithium loss when synthesizing Li6.5La3Ta0.5Zr1.5O12 in alumina crucibleJournal of Power Sources, 2014
- Tetragonal vs. cubic phase stability in Al – free Ta doped Li7La3Zr2O12 (LLZO)Journal of Materials Chemistry A, 2014
- Room temperature elastic moduli and Vickers hardness of hot-pressed LLZO cubic garnetJournal of Materials Science, 2012
- High conductivity of dense tetragonal Li7La3Zr2O12Journal of Power Sources, 2012
- The role of Al and Li concentration on the formation of cubic garnet solid electrolyte of nominal composition Li7La3Zr2O12Solid State Ionics, 2012
- Challenges in the development of advanced Li-ion batteries: a reviewEnergy & Environmental Science, 2011