Interface Properties and Droplet Spectra as a Function of Adjuvants and Spray Nozzles
Open Access
- 10 April 2025
- journal article
- research article
- Published by MDPI AG in Agriengineering
- Vol. 7 (4) , 116
Abstract
The process of droplet formation during spraying is influenced by several factors, including the nozzle type and the use of adjuvants. This study aimed to investigate the effect of adding adjuvants to spray solutions using different nozzles, with a focus on droplet spectra, and to examine the impact of the contact angle and the surface tension on this process. The surface tension and contact angle were evaluated using a droplet shape analyzer. The experiment was conducted in a completely randomized design (CRD) using four treatment solutions: water alone and water mixed with three different types of adjuvants, including fatty acid esters (vegetable oil-based), polyether–polymethyl, and polydimethyl-siloxane. The droplet spectra (volume median diameter, relative amplitude, and droplets smaller than 100 µm) were assessed using a particle size analyzer. A CRD with a 4 × 2 factorial scheme was used to assess the effects of the four treatment solutions and two flat-fan nozzles (ULD 120-02 with air induction and LD 110-02 without air induction technology). The polyether–polymethyl considerably reduced the contact angle and surface tension (226% and 180%, respectively, in relation to water). However, it did not homogenize the droplet spectra or reduce the drift risk. The vegetable oil-based adjuvant increased the droplet size when the standard flat-fan nozzle was used. No significant correlation was found between the surface tension and contact angle regarding the droplet spectra parameters. The effect of adjuvants on the droplet spectra was found to be dependent on the nozzle type, which prevents generalizations about the implications of their use.Keywords
Funding Information
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (311371/2021-3, Fundação de Amparo à Pesquisa do Estado de Minas Gerais—Brazil (FAPEMIG))
- Conselho Nacional de Desenvolvimento Científico e Tecnológico—Brazil (CNPq) (311371/2021-3, Fundação de Amparo à Pesquisa do Estado de Minas Gerais—Brazil (FAPEMIG))
This publication has 23 references indexed in Scilit:
- Coordination of distinctive pesticide adjuvants and atomization nozzles on droplet spectrum evolution for spatial drift reductionChinese Journal of Chemical Engineering, 2023
- Computational fluid dynamics analysis of an agricultural spray in a crossflowBiosystems Engineering, 2023
- Herbicidal ionic liquids containing double or triple anions as a new potential tool for weed control including herbicide-resistant biotypesCrop Protection, 2023
- Effect of geometrical parameters of air-induction nozzles on droplet characteristics and behaviourBiosystems Engineering, 2021
- Temperature dependence of the contact angle of water: A review of research progress, theoretical understanding, and implications for boiling heat transferAdvances in Colloid and Interface Science, 2021
- The effect of adjuvants on spray droplet size from hydraulic nozzlesPest Management Science, 2020
- Spray droplet impaction outcomes for different plant species and spray formulationsCrop Protection, 2017
- Spray drift review: The extent to which a formulation can contribute to spray drift reductionCrop Protection, 2013
- Effects on pesticide spray drift of the physicochemical properties of the spray liquidPrecision Agriculture, 2008
- Influence of agricultural adjuvants on droplet spectraPest Management Science, 2006