In-Situ Infrared Camera Monitoring for Defect and Anomaly Detection in Laser Powder Bed Fusion: Calibration, Data Mapping, and Feature Extraction
Open Access
- 31 March 2026
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 16 (7) , 3378
Abstract
Laser powder bed fusion (LPBF) is susceptible to defects arising from melt pool instabilities, spatter, heat accumulation, and powder spreading anomalies. In situ infrared (IR) monitoring can detect these issues; however, it typically generates large volumes of data that are costly to store and analyze. This work proposes a projection-based framework that directly maps in situ thermal measurements onto a three-dimensional (3D) voxelized part geometry, substantially reducing storage requirements while preserving spatial fidelity. In addition, several IR derived features are incorporated into a practical workflow for defect detection and process model calibration, including laser scan order, local pre-deposition temperature, maximum pre-scan temperature, and spatter generation and landing locations. For completeness, commonly used metrics such as interpass temperature, heat intensity, cooling rate, and relative melt pool area are extracted within the same unified processing pipeline. All features are computed using a consistent, reproducible Python-based implementation to streamline integration into routine monitoring and analysis tasks. Multiple parts are fabricated, monitored, and characterized to evaluate the proposed framework, demonstrating that the extracted features reliably identify process anomalies and correlate with observed defects.Keywords
All Related Versions
Funding Information
- Department of the Navy, Office of Naval Research https://ror.org/01awap711 (N00174-23-1-0011)
- U.S. Nuclear Regulatory Commission (31310022M0036)
This publication has 22 references indexed in Scilit:
- Understanding the role of geometry and interlayer cooling time on microstructure variations in LPBF Ti6Al4V through part-scale scan-resolved thermal modelingAdditive Manufacturing Letters, 2024
- A mechanistic explanation of shrinkage porosity in laser powder bed fusion additive manufacturingActa Materialia, 2023
- Multiphysics modeling of particle spattering and induced defect formation mechanism in Inconel 718 laser powder bed fusionThe International Journal of Advanced Manufacturing Technology, 2022
- Enabling Part-Scale Scanwise process simulation for predicting melt pool variation in LPBF by combining GPU-based Matrix-free FEM and adaptive RemeshingAdditive Manufacturing Letters, 2022
- Elucidating the effect of preheating temperature on melt pool morphology variation in Inconel 718 laser powder bed fusion via simulation and experimentAdditive Manufacturing, 2021
- In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive ManufacturingMetallurgical and Materials Transactions A, 2020
- Correlation of SWIR imaging with LPBF 304L stainless steel part propertiesAdditive Manufacturing, 2020
- Process optimization of complex geometries using feed forward control for laser powder bed fusion additive manufacturingAdditive Manufacturing, 2020
- A deep learning-based model for defect detection in laser-powder bed fusion using in-situ thermographic monitoringProgress in Additive Manufacturing, 2020
- In situ thermography for laser powder bed fusion: Effects of layer temperature on porosity, microstructure and mechanical propertiesAdditive Manufacturing, 2019