Measurement of Metal Nanoparticle Agglomerates Generated by Spark Discharge Using the Universal Nanoparticle Analyzer (UNPA)
Open Access
- 1 March 2012
- journal article
- research article
- Published by Taylor & Francis in Aerosol Science and Technology
- Vol. 46 (3) , 333-346
Abstract
Nanoparticle agglomerates play an essential role in the manufacturing of many nanomaterials and are commonly found in combustion products. Conventional aerosol instruments based on equivalent spheres are not directly applicable to the measurement of nanoparticle agglomerates. The increasing interest in real-time assessment of the structure of engineered nanoparticle agglomerates and the mass concentration of potentially hazardous agglomerates (e.g., diesel soot, welding fume) makes an instrument devoted to online structure and mass measurements for nanoparticle agglomerates highly desirable. A recently developed instrument, universal nanoparticle analyzer (UNPA), utilizes the close relation between agglomerate structure and unipolar charging properties and infers agglomerate structure from measurement of the average charge per agglomerate. It was used in this study to characterize in situ the structure of metal nanoparticle agglomerates generated by spark discharge, to study the effects of sintering on the structure of these agglomerates, and to make real-time assessment of their airborne mass concentration. The primary particles sizes measured by UNPA for the gold (Au), silver (Ag), and nickel (Ni) agglomerates are in reasonable agreement with the TEM (transmission electron microscopy) sizing results, d p = 7.9 ± 1.5, 11.8 ± 3.2, and 6.6 ± 1.0 nm, respectively. In addition, findings from the study of agglomerate structural change during sintering using the UNPA sensitivity coincide with results from TEM and mobility analyses. With regard to the mass concentration of silver agglomerates at room temperature, good agreement was found under our experimental conditions between results given by UNPA, the effective density, and the gravimetric measurement. Copyright 2012 American Association for Aerosol ResearchKeywords
This publication has 39 references indexed in Scilit:
- Rationale and principle of an instrument measuring lung deposited nanoparticle surface areaJournal of Nanoparticle Research, 2006
- Comparison of three methods of fractal analysis applied to soot aggregates from wood combustionJournal of Aerosol Science, 2006
- Electron Microscopy Investigation of Carbonaceous Particulate Matter Generated by Combustion of Fossil FuelsEnergy & Fuels, 2005
- Electric charge distribution and capacitance of agglomerates of spherical particles: Theory and experimental simulationJournal of Aerosol Science, 1995
- Particle Wall Loss Rates in VesselsAerosol Science and Technology, 1982
- Free-molecule drag on straight chains of uniform spheresJournal of Applied Physics, 1981
- Turbulent deposition and gravitational sedimentation of an aerosol in a vessel of arbitrary shapeJournal of Aerosol Science, 1981
- Theory of diffusion charging of arbitrarily shaped conductive aerosol particles by unipolar ionsJournal of Aerosol Science, 1981
- Long-range correlations in smoke-particle aggregatesJournal of Physics A: General Physics, 1979
- On the stationary charge distribution on aerosol particles in a bipolar ionic atmosphereGeofisica pura e applicata, 1963