Effects of Tantalum on Microstructure Evolution and Mechanical Properties of High-Nb TiAl Alloys Reinforced by Ti 2 AlC
Open Access
- 1 January 2019
- journal article
- research article
- Published by American Association for the Advancement of Science (AAAS) in Research
- Vol. 2019, 5143179
Abstract
Experiments have been carried out to study the relationship between the addition of tantalum and microstructure, especially the formation of the B2 phase in lamellar colonies. The mechanical properties, with different contents of Ta, were also measured. Ti46Al8Nb2.6C x Ta alloys were prepared by casting with the content of Ta varying from zero to 1.0 at.%. Experimental results show that the B2 phase forms in lamellar colonies with the addition of Ta, and its content increases when the content of Ta increases. Meanwhile, the γ phase decreases and the lattice parameter of the α 2 phase increases. The size of the lamellar colony decreased from 29.9 to 21.6 μ m. Ta dissolves into Ti 2 AlC by substitution, and its solubility is more than 1.1% tested by EDS. Nb, which is necessary for the formation of the B2 phase, comes from two aspects. The first is that Ta dissolves into the Ti 2 AlC and partly replaces the Nb atom and the second is the decrease in the γ phase because it has higher solid solubility for Nb. The increase in Nb in the liquid phase increases the composition supercooling and heteronucleation at the solidification front, which accounts for refining the lamellar colony. Room temperature compressive testing showed that the compressive strength and the strain increased when the Ta content increased up to 0.8% and then decreased. Improvement of the compressive properties resulted from the grain boundary strengthening and their decrease induced by more content of the B2 phase. Tensile properties, at elevated temperature, were improved with testing temperature increasing from 750 to 950°C, because solid solution strengthening is a major influence factor.Keywords
Funding Information
- National Natural Science Foundation of China (51741404)
- National Key Research and Development Program of China (2017YFA0403804)
This publication has 40 references indexed in Scilit:
- Deformation of microstructurally refined cast Ti46Al8Nb and Ti46Al8TaIntermetallics, 2012
- Hot rolling of gamma titanium aluminide foilActa Materialia, 2010
- Microstructures and tensile properties of massively transformed and aged Ti46Al8Nb and Ti46Al8Ta alloysIntermetallics, 2009
- Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scaleIntermetallics, 2007
- On the massive phase transformation regime in TiAl alloys: The alloying effect on massive/lamellar competitionIntermetallics, 2007
- Tracer solute diffusion of Nb, Zr, Cr, Fe, and Ni in γ-TiAl: effect of preferential site occupationIntermetallics, 2001
- Microstructural control through seeding and directional solidification of TiAl alloys containing Mo and CActa Materialia, 2000
- Effect of carbon addition on the microstructures and mechanical properties of γ-TiAl alloysIntermetallics, 1997
- Assessment of models used to predict the strength of discontinous silicon carbide reinforced aluminum alloysScripta Metallurgica, 1987
- On the strength of discontinuous silicon carbide reinforced aluminum compositesScripta Metallurgica, 1986