New Cementitious Materials Based on Alkali‐Activated Fly Ash: Performance at High Temperatures
Open Access
- 1 October 2008
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 91 (10) , 3308-3314
Abstract
This paper reports on a comparative study of the mechanical performance at different temperatures of a commercial Portland cement, used as a control, and a new cementitious material made from an 8M‐NaOH activated fly ash and containing no OPC. Two types of mechanical tests were conducted: (i) high temperature mechanical tests, to determine the strength and fracture toughness of the two materials between 25° and 600°C, and (ii) post‐thermal treatment tests, to evaluate the residual strength after 1 h of exposure to different temperatures (200°, 400°, 600°, 800°, and 1000°C). In both cases, the results showed that the new cementitious material performed significantly better at high temperatures than the Portland cement control. Differential thermogravimetry (DTG)/TG, Fourier transform infrared (FTIR), and X‐ray diffraction analyses were also conducted to analyze the mineralogical and microstructural variations taking place in the material as a result of high temperature exposure. The results of these tests were correlated with the mechanical behaviour observed.Keywords
This publication has 20 references indexed in Scilit:
- Alkali–aggregate reaction in activated fly ash systemsCement and Concrete Research, 2007
- Quantitative determination of phases in the alkaline activation of fly ash. Part II: Degree of reactionFuel, 2006
- Stabilization/solidification of hazardous and radioactive wastes with alkali-activated cementsJournal of Hazardous Materials, 2006
- The role played by the reactive alumina content in the alkaline activation of fly ashesMicroporous and Mesoporous Materials, 2006
- Mid-infrared spectroscopic studies of alkali-activated fly ash structureMicroporous and Mesoporous Materials, 2005
- Fixing Arsenic in Alkali‐Activated Cementitious MatricesJournal of the American Ceramic Society, 2005
- Phase transformation on heating of an aged cement pasteThermochimica Acta, 2004
- Characterisation of fly ashes. Potential reactivity as alkaline cements☆Fuel, 2003
- Physicochemical, mineralogical, and morphological characteristics of concrete exposed to elevated temperaturesCement and Concrete Research, 2002
- The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applicationsMinerals Engineering, 1997