Increase in Robustness against Effects of Coil Misalignment on Electrical Parameters Using Magnetic Material Layer in Planar Coils of Wireless Power Transfer Transformer
Open Access
Abstract
Utilization of wireless power transfer in light rail transits is seen as one solution for electrification of lines. The main advantage of this supply system is the reduction of installation; moreover, the alignment between the transmitter coil in the track and the receiver coil in the train should be perfect in order not to affect the power transfer. To reduce the effects of misalignment on the input and output electric parameters of the system, a new planar core and coil design, called hybrid intercore coil, is proposed. The proposed design uses a magnetic material layer between the windings in the inner half of the coil to create a non-uniform magnetic field distribution, which makes the system more robust against the effects of coil misalignment on the system current and voltage. Simulations with finite element method software were conducted to compare designs. The results show that the proposed design is less susceptible to the effects of misalignment and is more efficient. Prototype cores were constructed to verify the simulation results. Measurements show a smaller input overcurrent and output overvoltage when operating in resonance mode. The proposed design reduced the effects of coil misalignment on electrical parameters.Keywords
This publication has 23 references indexed in Scilit:
- Misalignment based electric circuit of a wireless power transfer transformer for light rail transit2017
- An Autonomous Coil Alignment System for the Dynamic Wireless Charging of Electric Vehicles to Minimize Lateral MisalignmentEnergies, 2017
- A Novel WPT System Based on Dual Transmitters and Dual Receivers for High Power Applications: Analysis, Design and ImplementationEnergies, 2017
- Catenary free operation of light rail vehicles — Topology and operational concept2016
- Computation of the Mutual Inductance between Air-Cored Coils of Wireless Power TransformerJournal of Physics: Conference Series, 2015
- Design and experimentation of two-coil coupling for electric city-car WPT chargingJournal of Electromagnetic Waves and Applications, 2015
- Development & Implementation of Electric Tram System with Wireless Charging TechnologyICT Express, 2015
- Evaluation of a non-contact power supply system with a figure-of-eight coil for railway vehicles2015
- Development and Validation of Model for 95%-Efficiency 220-W Wireless Power Transfer Over a 30-cm Air GapIEEE Transactions on Industry Applications, 2011
- Design of a high frequency Inductively Coupled Power Transfer system for electric vehicle battery chargeApplied Energy, 2009