High current, high current density field emitter array cathodes
Authors:
- 1 March 2005
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 23 (2) , 691-693
Abstract
Microfabricated field emitters have shown the potential for very high current densities (>100A∕cm2) and total emission currents (>1A). However, realizing this potential has been elusive, primarily because these cathodes exhibit insufficient emission uniformity over an emitter array. In this article we report the development of an in situ processing method based on emitter tip self-heating during operation that is shown to improve emission uniformity between emitter tips. Two tips differing in emission current by three orders of magnitude for a given voltage as fabricated are shown to be essentially identical in their emission characteristics after controlled pulsing to very high emission current. When the method was applied to a 50 000 tip array, it produced 300 mA of emission (40A∕cm2). The experimental arrangement prevented advancing to higher emission levels due to space charge limitations. It is expected that 1 A of emission at ∼100A∕cm2 is possible with appropriate modifications to the experimental apparatus.Keywords
This publication has 3 references indexed in Scilit:
- Spindt cathode tip processing to enhance emission stability and high-current performanceJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2003
- Field-emitter-array development for microwave applicationsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- Field Emission1956