Towards Improving the Practical Energy Density of Li-Ion Batteries: Optimization and Evaluation of Silicon:Graphite Composites in Full Cells
Authors:
Open Access
- 31 December 2016
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (1) , A6294-A6302
Abstract
Increasing the energy density of Li-ion batteries is very crucial for the success of electric vehicles, grid-scale energy storage, and next-generation consumer electronics. One popular approach is to incrementally increase the capacity of the graphite anode by integrating silicon into composites with capacities between 500 and 1000 mAh/g as a transient and practical alternative to the more-challenging, silicon-only anodes. In this work, we have calculated the percentage of improvement in the capacity of silicon:graphite composites and their impact on energy density of Li-ion full cell. We have used the Design of Experiment method to optimize composites using data from half cells, and it is found that 16% improvements in practical energy density of Li-ion full cells can be achieved using 15 to 25 wt% of silicon. However, full-cell assembly and testing of these composites using LiNi0.5Mn0.5Co0.5O2 cathode have proven to be challenging and composites with no more than 10 wt% silicon were tested giving 63% capacity retention of 95 mAh/g at only 50 cycles. The work demonstrates that introducing even the smallest amount of silicon into graphite anodes is still a challenge and to overcome that improvements to the different components of the Li-ion battery are required.Keywords
This publication has 43 references indexed in Scilit:
- ZnMn2O4 nanoparticles synthesized by a hydrothermal method as an anode material for Li-ion batteriesElectrochimica Acta, 2012
- Study of Co–Sn and Ni–Sn alloys prepared in molten chlorides and used as negative electrode in rechargeable lithium batteryElectrochimica Acta, 2011
- Lithium polyacrylate as a binder for tin–cobalt–carbon negative electrodes in lithium-ion batteriesElectrochimica Acta, 2010
- Tin-based materials as negative electrodes for Li-ion batteries: Combinatorial approaches and mechanical methodsInternational Journal of Energy Research, 2010
- High-performance lithium battery anodes using silicon nanowiresNature Nanotechnology, 2007
- Recent findings and prospects in the field of pure metals as negative electrodes for Li-ion batteriesJournal of Materials Chemistry, 2007
- Sodium Carboxymethyl CelluloseElectrochemical and Solid-State Letters, 2007
- Electrochemical behaviors of silicon based anode materialJournal of Power Sources, 2005
- Lithium Batteries2003
- Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteriesNature, 2000